跳转到主内容

修复你的物品

维修的权力

商店

简介

You can use this guide to remove the heat sink in for cleaning, replacement or to gain access to the CPU.

配件

没有特定配件。

  1. Unscrew the two 5.1 mm screws that secure the bottom cover.
    • Unscrew the two 5.1 mm screws that secure the bottom cover.

    • Note that the screws will not come all the way out of the sockets.

  2. Lift from the notch until the back panel comes up.
    • Lift from the notch until the back panel comes up.

  3. Disconnect the fan from the motherboard by pulling the plug shown in the picture.
    • Disconnect the fan from the motherboard by pulling the plug shown in the picture.

  4. Unscrew the three 4.6mm screws shown in the picture.
    • Unscrew the three 4.6mm screws shown in the picture.

  5. Gently lift the fan straight up until it is lifted out of the case.
    • Gently lift the fan straight up until it is lifted out of the case.

  6. Unscrew the four 7.3 mm screws shown in the picture.
    • Unscrew the four 7.3 mm screws shown in the picture.

    • Note that springs are attached to the screws. Do not remove the springs.

  7. Pull the heat sink assembly out of the laptop. Pull the heat sink assembly out of the laptop.
    • Pull the heat sink assembly out of the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 5

总计 97