简介

This guide will show you how to remove and replace the fan cooling solution of the laptop if for some reason it has become faulty and needs replacement.

  1. Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel. Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.
    • Using the Phillips #0 screwdriver, remove the (11) eleven 5.4 mm screws from the back panel.

  2. Using a plastic opening tool, pull out the back panel from the laptop. Using a plastic opening tool, pull out the back panel from the laptop.
    • Using a plastic opening tool, pull out the back panel from the laptop.

  3. Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws. Disconnect the battery connector from the motherboard. Disconnect the battery connector from the motherboard.
    • Using the Phillips #0 screwdriver, remove the (2) 5.4 mm screws.

    • Disconnect the battery connector from the motherboard.

  4. Pull the battery outward and remove it from the rest of the laptop.
    • Pull the battery outward and remove it from the rest of the laptop.

  5. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  6. Remove the 5.4 mm Phillips #0 screw holding the Wireless Network Card. The network card will pop up by itself. The network card will pop up by itself.
    • Remove the 5.4 mm Phillips #0 screw holding the Wireless Network Card.

    • The network card will pop up by itself.

  7. Grab the network card and gently pull it out. Grab the network card and gently pull it out.
    • Grab the network card and gently pull it out.

  8. Pull out  the RAM metallic cover. Pull out  the RAM metallic cover.
    • Pull out the RAM metallic cover.

  9. Grab the black insulating tape  and pull it out. Grab the black insulating tape  and pull it out.
    • Grab the black insulating tape and pull it out.

  10. Using the Phillips #0 screwdriver, remove the (6) six fan screws from the device. (5) Five copper and (1) one silver Phillips #0 5.4mm screws.
    • Using the Phillips #0 screwdriver, remove the (6) six fan screws from the device.

    • (5) Five copper and (1) one silver Phillips #0 5.4mm screws.

    • Disconnect the fan from the motherboard.

  11. Unplug the Fan connector from its socket on the motherboard. Unplug the Fan connector from its socket on the motherboard.
    • Unplug the Fan connector from its socket on the motherboard.

  12. Carefully remove the fan from the laptop. Carefully remove the fan from the laptop.
    • Carefully remove the fan from the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

Julian Escallon

于2017年09月27日注册

609 信誉积分

创作了5篇指南

团队

USF Tampa, Team S14-G1, Boczar Fall 2017 USF Tampa, Team S14-G1, Boczar Fall 2017 的会员

USFT-BOCZAR-F17S14G1

4 名成员

创作了5篇指南

Looks like heat sink and fan are one unit. Advice for regular dust cleaning? How was the condition of the factory thermal paste?

cfryhover - 回复

Where can one find this fan?

Gabriel Rivera - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 6

总计 261