跳转到主内容

简介

USe this guide to replace the tripod socket.

配件

没有特定配件。

  1. Carefully unscrew the four Phillips #0 screws on the bottom of the camera. Make sure you don't miss the one that's actually in the tripod socket hole.
    • Carefully unscrew the four Phillips #0 screws on the bottom of the camera.

    • Make sure you don't miss the one that's actually in the tripod socket hole.

  2. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  3. Open the back door on the camera by pushing down on the door latch.
    • Open the back door on the camera by pushing down on the door latch.

  4. Apply pressure to the bottom plate and it will pop off.
    • Apply pressure to the bottom plate and it will pop off.

    • From here, you can replace the bottom plate, or continue on to further steps.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Zachary

于2011年04月12日注册

37 信誉积分

创作了2篇指南

团队

Cal Poly, Team 18-19, Garner Spring 2011 Cal Poly, Team 18-19, Garner Spring 2011 的会员

CPSU-GARNER-S11S18G19

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

Past 24 Hours: 2

Past 7 Days: 5

Past 30 Days: 5

总计 2,196