跳转到主内容

LeapFrog LeapTV Controller Button Replacement

你所需要的

  1. LeapFrog LeapTV Controller Button Replacement, Battery: 步骤 1 中的图像 1,1
    • Use the Metal Spudger to push the release clip on the battery cover.

  2. LeapFrog LeapTV Controller Button Replacement: 步骤 2 中的图像 1,1
    • Lift the cover off.

  3. LeapFrog LeapTV Controller Button Replacement: 步骤 3 中的图像 1,1
    • The battery holder is now visible with the removal of the cover.

  4. LeapFrog LeapTV Controller Button Replacement, Buttons: 步骤 4 中的图像 1,1
    • Use the screwdriver to remove the eight 8.7mm PH1 Phillips head screws.

  5. LeapFrog LeapTV Controller Button Replacement: 步骤 5 中的图像 1,1
    • Slightly lift up on the back cover until the handle covers are free to rotate.

  6. LeapFrog LeapTV Controller Button Replacement: 步骤 6 中的图像 1,1
    • Slide the the side of the handle facing you to the left to reveal the "A" and "B" button circuit board.

  7. LeapFrog LeapTV Controller Button Replacement: 步骤 7 中的图像 1,1
    • Use the screwdriver to remove the three 8.5mm PH1 Phillips head screws.

  8. LeapFrog LeapTV Controller Button Replacement: 步骤 8 中的图像 1,1
    • Lift up on the circuit board and move it to the side.

    • Be careful to not cause excess stress to the connecting wires when handling the circuit board. Excess stress can cause solder points to break.

  9. LeapFrog LeapTV Controller Button Replacement: 步骤 9 中的图像 1,1
    • Use the plastic opening tool to release the buttons from the controller casing.

  10. LeapFrog LeapTV Controller Button Replacement: 步骤 10 中的图像 1,1
    • Remove the "A" and "B" buttons by pulling up on one of the buttons.

  11. LeapFrog LeapTV Controller Button Replacement: 步骤 11 中的图像 1,1
    • Buttons are now removed.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

IUPUI, Team S4-G2, Baechle Spring 2017 IUPUI, Team S4-G2, Baechle Spring 2017 的会员

IUPUI-BAECHLE-S17S4G2

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 7

总计 350