跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Deterioration of the grindstone is one of the most common issues with the Landis Universal Cylindrical Grinder. Because these machines are so old, there is little maintenance or repair documentation available. This guide will show you how to replace the grindstone on the machine and avoid the costs of hiring an on-site specialist.

  1. Switch off the grinder's breaker box before performing any maintenance on the machine. Switch off the grinder's breaker box before performing any maintenance on the machine.
    • Switch off the grinder's breaker box before performing any maintenance on the machine.

  2. Lift the yellow guard up to unlock the grindstone access panel. Lift the yellow guard up to unlock the grindstone access panel.
    • Lift the yellow guard up to unlock the grindstone access panel.

  3. Pull the access panel outward to expose the grindstone. Pull the access panel outward to expose the grindstone.
    • Pull the access panel outward to expose the grindstone.

  4. 任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits

    任天堂 Switch 套装

    A quick fix to get back in the game

    Shop Switch Kits
  5. Remove the twelve bolts securing the grindstone using a ratchet with a 5/16 Hex bit. Remove the twelve bolts securing the grindstone using a ratchet with a 5/16 Hex bit.
    • Remove the twelve bolts securing the grindstone using a ratchet with a 5/16 Hex bit.

  6. Gently remove the steel hub from the grindstone spindle. Gently remove the steel hub from the grindstone spindle.
    • Gently remove the steel hub from the grindstone spindle.

  7. Carefully remove the grindstone itself from the spindle, making sure to support it from the top and inner ring. Mind your fingers!  The grindstone is quite heavy and can cause injury if it is mishandled or dropped.
    • Carefully remove the grindstone itself from the spindle, making sure to support it from the top and inner ring.

    • Mind your fingers! The grindstone is quite heavy and can cause injury if it is mishandled or dropped.

  8. Softly sand the hub with 600-grit sandpaper or a wire brush to remove any surface rust. Softly sand the hub with 600-grit sandpaper or a wire brush to remove any surface rust.
    • Softly sand the hub with 600-grit sandpaper or a wire brush to remove any surface rust.

  9. Although not mandatory, now would be a good time to scrape out any debris that has built up on the inside of the guard.
    • Although not mandatory, now would be a good time to scrape out any debris that has built up on the inside of the guard.

结论

To reassemble your device, follow these instructions in reverse order starting from step 6.

3等其他人完成本指南。

Andrew Shotwell

于2016年02月23日注册

136 信誉积分

撰写一个指南

团队

Texas Tech, Team 22-3, Rauch Spring 2016 Texas Tech, Team 22-3, Rauch Spring 2016 的会员

TTU-RAUCH-S16S22G3

3 名成员

创作了1篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 6

总计 271