简介

Use this guide to replace your LG-P970 touch screen.

You can buy this part on amazon http://www.amazon.fr/dp/B00CF29W78

工具

无需工具。

配件

  1. remove the back cover remove the battery remove the SIM card
    • remove the back cover

    • remove the battery

    • remove the SIM card

    • remove the µSD card (Memory)

  2. remove 7 screws on the back with a tool start to open the back frame and it's now easy to remove the back frame with hand, carefully
    • remove 7 screws on the back

    • with a tool start to open the back frame

    • and it's now easy to remove the back frame with hand, carefully

  3. remove buttons locate the back camera with a tool raise up the led.carefully
    • remove buttons

    • locate the back camera

    • with a tool raise up the led.carefully

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. with a tool disconnect the back camera and remove the camera with your fingers. and remove the camera with your fingers.
    • with a tool disconnect the back camera

    • and remove the camera with your fingers.

  6. don't forget to remove the little connector of screen, with a tool, right next to the empty slot of the camera. don't forget to remove the little connector of screen, with a tool, right next to the empty slot of the camera.
    • don't forget to remove the little connector of screen, with a tool, right next to the empty slot of the camera.

  7. It's time to remove carefully the tactile screen. don't scratch le LCD!!! don't scratch le LCD!!!
    • It's time to remove carefully the tactile screen.

    • don't scratch le LCD!!!

  8. the touch panel is glued with double-sided tape. You can remove it with your fingers. carefull with the touch screen connector. cut new double sided tape (1-2mm width), put it on the are and peel it. cut new double sided tape (1-2mm width), put it on the are and peel it.
    • the touch panel is glued with double-sided tape. You can remove it with your fingers. carefull with the touch screen connector.

    • cut new double sided tape (1-2mm width), put it on the are and peel it.

  9. remove the inside protection on the new touch screen. carefully put the news touch screen on the LG. Take care that the connector goes right through the right hole. to finish, add all part by reading these instructions in reverse ;-)
    • remove the inside protection on the new touch screen.

    • carefully put the news touch screen on the LG. Take care that the connector goes right through the right hole.

    • to finish, add all part by reading these instructions in reverse ;-)

    • and try if it work !

结论

To reassemble your device, follow these instructions in reverse order.

18等其他人完成本指南。

Fox4EGX

于2012年10月01日注册

515 信誉积分

撰写一个指南

Hi. To take the screws out do I need a phillips? Thanks.

schutze61 - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 19

总计 9,278