LG Watch Urbane Motherboard Replacement

简介

In order to replace your motherboard you are going to need the proper tools. There are screws that need to be unscrewed and components that need to be pried open carefully. The tools needed will be plastic opening tools, PH #000 screwdriver and tweezers. With these prepared everything should be ready to start the replacement of the motherboard for the LG Watch Urbane.

你所需要的

步骤 1 Battery

LG Watch Urbane Motherboard Replacement, Battery: 步骤 1 中的图像 1，2

LG Watch Urbane Motherboard Replacement, Battery: 步骤 1 中的图像 2，2

Push on the band in order to expose the pins
Using tweezers, remove the pins, one on each side, in order to only leave the face of the watch.

编辑

步骤 2

Using plastic opening tools, carefully pry open the back cover of the the watch.
Use the little hatch on the bottom portion of the watch in order to easily pry open the watch

编辑

步骤 3

LG Watch Urbane Motherboard Replacement: 步骤 3 中的图像 3，3

在这个步骤中使用的工具：

Magnetic Project Mat

$19.95

购买

Using a PH000 screwdriver, remove the three screws in order to release the motherboard from the watch.
Do not lose the three screws! Keep them somewhere you will remember! A magnetic mat can help with this. Ifixit Magnetic Mat
Using plastic opening tools, remove the four connectors attached to the motherboard

编辑

步骤 4

LG Watch Urbane Motherboard Replacement: 步骤 4 中的图像 3，3

Using the plastic opening tools, carefully lift up the motherboard.
IGNORE THIS STEP IF ONLY REMOVING MOTHERBOARD: Use the plastic opening tools to carefully remove the battery

编辑