简介

This guide gives step-by-step instructions on how to remove the mother board in the LG VX5500 cell phone. To complete the task you will need a #00 Phillip's head screwdriver, tweezers, and a plastic opening tool.

  1. Remove the battery cover by placing your thumb on the small ridge near the top of the phone back and push downward, exposing the battery. Our device did not come with a battery cover so it is not shown here. Remove the battery using your finger to pry it out of the battery housing.
    • Remove the battery cover by placing your thumb on the small ridge near the top of the phone back and push downward, exposing the battery.

    • Our device did not come with a battery cover so it is not shown here.

    • Remove the battery using your finger to pry it out of the battery housing.

  2. Remove the (2) rubber screw covers located near the hinge of the phone using tweezers or a thumb tack. Unscrew the (4) 3.6mm screws using a #00 Phillip's head screw driver.
    • Remove the (2) rubber screw covers located near the hinge of the phone using tweezers or a thumb tack.

    • Unscrew the (4) 3.6mm screws using a #00 Phillip's head screw driver.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. Carefully pry off the phone's backing using a plastic opening tool. Slip the tool into the crack between the keypad (front panel) and the back panel. Slide the tool along the sides of the phone to detach the tabs holding the backing on.
    • Carefully pry off the phone's backing using a plastic opening tool.

    • Slip the tool into the crack between the keypad (front panel) and the back panel.

    • Slide the tool along the sides of the phone to detach the tabs holding the backing on.

  5. Peel back the sticker with tweezers and hold it back with your finger. Use the tweezers to lift the display adapter off the logic board.
    • Peel back the sticker with tweezers and hold it back with your finger.

    • Use the tweezers to lift the display adapter off the logic board.

  6. Lift the mother board out of the phone casing. The keyboard can be easily removed once the mother board is out of the phone.
    • Lift the mother board out of the phone casing.

    • The keyboard can be easily removed once the mother board is out of the phone.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Henry

于2012年04月12日注册

181 信誉积分

创作了3篇指南

团队

Cal Poly, Team 7-33, Maness Spring 2012 Cal Poly, Team 7-33, Maness Spring 2012 的会员

CPSU-MANESS-S12S7G33

4 名成员

创作了10篇指南

You guys are great!

Kurt Beske - 回复

So what do you do with the mother board then?

Erik Sodders - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 10

总计 1,726