简介

A quick guide to removing the front cover of the flip phone.

  1. Turn the phone on its back.
    • Turn the phone on its back.

    添加评论

  2. Orient the phone as shown.
    • Orient the phone as shown.

    • Remove the battery cover by pushing upward with your thumb.

    添加评论

    • Place your fingernail at the top of the battery and pry the battery out towards you.

    添加评论

    • Flip the phone open.

    • Remove the four rubber plugs, located at the corners of the LCD screen, with a push-pin.

    • Use a Phillips #00 screwdriver to remove the four screws located underneath the rubber plugs.

    添加评论

    • Insert the plastic opening tool in the seam of the top portion of the flip phone.

    • Gently pry the seam open.

    • Move the opening tool around the perimeter of the seam and gently take the front LCD face plate out.

    添加评论

    • Close the flip phone.

    • Hold the base of the phone and gently remove the faceplate.

    • Place the phone and the faceplate on a clean, flat surface.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Douglas Blaalid

于2010年01月13日注册

282 信誉积分

创作了8篇指南

团队

Cal Poly, Team 4-13, Forte Winter 2010 Cal Poly, Team 4-13, Forte Winter 2010 的会员

CPSU-FORTE-W10S4G13

5 名成员

创作了15篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 2

总计 1,834