Skip to main content

介绍

In this guide we will teach you how to properly remove and replace the flex cable in the LG Tribute HD LS676. The flex cable or cable ribbon is a small delicate cable that is connected to the motherboard. It should be handled cautiously since it can be easily damaged by an applied force.

配件

没有特定配件。

  1. Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove. Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove.
    • Insert a fingernail, or plastic opening tool, into the cutout on the back cover and pry outward to remove.

  2. Pull the battery out of the phone. Remove the SD Card by sliding the card out as shown.
    • Pull the battery out of the phone.

    • Remove the SD Card by sliding the card out as shown.

  3. Remove the twelve 2mm JIS #00 screws from the mid-frame. Remove the twelve 2mm JIS #00 screws from the mid-frame.
    • Remove the twelve 2mm JIS #00 screws from the mid-frame.

  4. Using a plastic opening tool, remove the antenna extender from the bottom. Using a plastic opening tool, remove the antenna extender from the bottom. Using a plastic opening tool, remove the antenna extender from the bottom.
    • Using a plastic opening tool, remove the antenna extender from the bottom.

  5. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  6. Using your fingers, remove the mid-frame. Using your fingers, remove the mid-frame.
    • Using your fingers, remove the mid-frame.

  7. Use a plastic opening tool to disconnect the front and rear cameras from the motherboard. Remove the cameras from the phone. Remove the cameras from the phone.
    • Use a plastic opening tool to disconnect the front and rear cameras from the motherboard.

    • Remove the cameras from the phone.

  8. Using a plastic opening tool, pry up the front facing speaker and remove it from the phone. Using a plastic opening tool, pry up the front facing speaker and remove it from the phone. Using a plastic opening tool, pry up the front facing speaker and remove it from the phone.
    • Using a plastic opening tool, pry up the front facing speaker and remove it from the phone.

  9. Disconnect the LCD from the motherboard with a plastic opening tool.
    • Disconnect the LCD from the motherboard with a plastic opening tool.

  10. Use a plastic opening tool to pry up the motherboard form the display housing. Remove the motherboard from the phone.
    • Use a plastic opening tool to pry up the motherboard form the display housing.

    • Remove the motherboard from the phone.

  11. Use your fingers to remove the flex cables from the phone. Use your fingers to remove the flex cables from the phone.
    • Use your fingers to remove the flex cables from the phone.

结论

To reassemble your device, follow these instructions in reverse order.

Dhruv Patel

于2018年02月14日注册

268 Reputation

创作了2篇指南

Team

USF Tampa, Team S1-G3, Nance Spring 2018 USF Tampa, Team S1-G3, Nance Spring 2018 的会员

USFT-NANCE-S18S1G3

4 名成员

创作了10篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 264