跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This guide provides instructions for replacing the microphone on the LG TP 1100 flip phone.

  1. Hold antenna between your fingers and unscrew in a counterclockwise direction.
    • Hold antenna between your fingers and unscrew in a counterclockwise direction.

  2. You will remove antenna by pulling it in an upward motion away from the socket.
    • You will remove antenna by pulling it in an upward motion away from the socket.

  3. Turn phone so that the back is facing you.
    • Turn phone so that the back is facing you.

  4. Use your thumb to pull the tab in an upward motion to release the battery.
    • Use your thumb to pull the tab in an upward motion to release the battery.

  5. 基本电子产品工具包

    小工具包。却有无限可能。

    Shop Toolkits

    基本
    电子产品
    工具包

    Shop Toolkits
  6. Hold phone securely in one hand and pull the battery away from the phone with your other hand.
    • Hold phone securely in one hand and pull the battery away from the phone with your other hand.

  7. Use your screwdriver to unscrew the four screws from the back plate.
    • Use your screwdriver to unscrew the four screws from the back plate.

  8. Turn phone to the side as indicated in the picture.
    • Turn phone to the side as indicated in the picture.

  9. Remove the back cover that you just unscrewed and set aside.
    • Remove the back cover that you just unscrewed and set aside.

  10. Open the remaining parts like a book but do not separate the two pieces.
    • Open the remaining parts like a book but do not separate the two pieces.

    • Do not tear the tape connecting the two pieces.

  11. Rotate the phone so that the circuit board is in the palm of your hand and the part connected with tape hangs behind. Use your opening tool to pry the circuit board from the front cover. Do not let the number pad to fall out.
    • Rotate the phone so that the circuit board is in the palm of your hand and the part connected with tape hangs behind.

    • Use your opening tool to pry the circuit board from the front cover. Do not let the number pad to fall out.

  12. To remove the microphone, insert your opening tool under microphone and push upward to pry microphone away from the front cover.
    • To remove the microphone, insert your opening tool under microphone and push upward to pry microphone away from the front cover.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Johnny Inlow

于2010年04月10日注册

19 信誉积分

创作了3篇指南

团队

Cal Poly, Team 27-91, Amido Spring 2010 Cal Poly, Team 27-91, Amido Spring 2010 的会员

CPSU-AMIDO-S10S27G91

5 名成员

创作了11篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,225