修复你的物品 社区 商店

LG Optimus F3 Charging port unit Replacement

你所需要的

  1. LG Optimus F3 Charging port unit Replacement, Motherboard: 步骤 1 中的图像 1，1

    • Turn the device so that the back faces up.

    • It is easiest to open the case near the charging port located at the bottom of the phone.

    • Remove the back case by pushing up on the back and pulling down on the face as illustrated in the image.

    编辑

  2. LG Optimus F3 Charging port unit Replacement: 步骤 2 中的图像 1，1

    • With back case removed, the battery is visible. The battery is the large square object.

    • Remove the battery by flipping the bottom edge upward to separate the battery from the case.

    编辑

  3. LG Optimus F3 Charging port unit Replacement: 步骤 3 中的图像 1，1

    • Remove 10 1.0 mm screws located on the back of the device.

    • Refer to the outlined locations in the image for the screws.

    编辑

  4. LG Optimus F3 Charging port unit Replacement: 步骤 4 中的图像 1，1

    • Use the plastic opening tool to separate the inner case from the device.

    • Wedge the plastic opening tool between the case.

    • Wiggle the tool and use leverage to pry the case apart.

    编辑

  5. LG Optimus F3 Charging port unit Replacement: 步骤 5 中的图像 1，1

    • The camera unit is located at the top left of the phone. The camera is a silver box with a black lens. The image pin points where the camera is on the motherboard.

    • Use the plastic opening tool to separate the camera from the motherboard.

    • Wedge the plastic tool between the camera and the motherboard to loosen the camera unit.

    编辑

  6. LG Optimus F3 Charging port unit Replacement: 步骤 6 中的图像 1，1

    • Use a pair of tweezers to disconnect and remove the rear facing camera.

    编辑

  8. LG Optimus F3 Charging port unit Replacement: 步骤 7 中的图像 1，1

    • Use the plastic opening tool to separate the sim card and the memory card connector from the motherboard.

    • Note that the sim card and the memory card connector are one unit.

    • Wedge the plastic tool to lift up the sim-memory unit from the motherboard.

    编辑

  9. LG Optimus F3 Charging port unit Replacement: 步骤 8 中的图像 1，1

    • Use the plastic opening tool to remove the charging port unit.

    • Wedge the plastic opening tool between the charging port unit and the motherboard to separate the port.

    编辑

  10. LG Optimus F3 Charging port unit Replacement: 步骤 9 中的图像 1，1

    • Use the plastic opening tool to remove the motherboard located directly above the battery encasement.

    • The motherboard is an L-shaped unit above and to the left of the battery encasement.

    • Wedge the plastic opening tool between the circuit board and the motherboard to separate the unit.

    编辑

  11. LG Optimus F3 Charging port unit Replacement, Charging port unit: 步骤 10 中的图像 1，1

    • Remove one 1.0 mm screw.

    编辑

  12. LG Optimus F3 Charging port unit Replacement: 步骤 11 中的图像 1，1

    • Use a plastic opening tool to remove front glass protector.

    编辑

  13. LG Optimus F3 Charging port unit Replacement: 步骤 12 中的图像 1，1

    • Use the plastic opening tool to remove front glass cover carefully. Try not to break the connector.

    编辑

  14. LG Optimus F3 Charging port unit Replacement: 步骤 13 中的图像 1，1

    • Remove the front facing camera.

    编辑

  15. LG Optimus F3 Charging port unit Replacement: 步骤 14 中的图像 1，1

    • Use the plastic opening tool to carefully remove the home button board. It is attached with double-sided tape.

    编辑

  16. LG Optimus F3 Charging port unit Replacement: 步骤 15 中的图像 1，1

    • Use the plastic opening tool to remove the charging port unit.

    编辑

  17. LG Optimus F3 Charging port unit Replacement: 步骤 16 中的图像 1，1

    • You are all set.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与3其他贡献者

Jonathan Fang

于10/28/15注册

356 声望

创作了2篇指南

徽章: 11

+ 8更多徽章

团队

UMass Dartmouth, Team 1-5, Miles Fall 2015 UMass Dartmouth, Team 1-5, Miles Fall 2015 的会员

UMASSD-MILES-F15S1G5

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 568