本指南有最近更改,您可查看未经巡查的最新版本。
你所需要的
-
-
With one hand, push the rectangular button located on the back top-side of the phone.
-
With your other hand, remove the rear cover.
-
-
-
-
Once the circuit board has been removed the rubber keypad will be visible. If it has not fallen out on its own it can simply be peeled out. It is lightly attached like a sticker on the top three tabs. The left most table is labeled “B”, the center tab is blank, and the right tab is labeled “N”.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.