跳转到主内容
  1. Slide the battery cover release towards top of phone. Place one finger at each side of the battery cover.
    • Slide the battery cover release towards top of phone.

    • Place one finger at each side of the battery cover.

    • Lift and remove the battery cover.

  2. Place a finger at the top corner of the battery and lift out of the phone. Place a finger at the top corner of the battery and lift out of the phone.
    • Place a finger at the top corner of the battery and lift out of the phone.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Use the spudger to lift up the two screw covers at the top of the phone. Remove all four Phillips#00 (3.3mm) screws with screwdriver.
    • Use the spudger to lift up the two screw covers at the top of the phone.

    • Remove all four Phillips#00 (3.3mm) screws with screwdriver.

  5. Use the spudger to lift up the rear case from the phone. Note: Rear case is connected on all sides and will have to be detached on all sides before removal. Remove the rear case from the device.
    • Use the spudger to lift up the rear case from the phone.

    • Note: Rear case is connected on all sides and will have to be detached on all sides before removal.

    • Remove the rear case from the device.

结论

To reassemble your device, follow these instructions in reverse order.

Matthew Cataldo

于2012年01月23日注册

1 信誉积分

撰写一个指南

团队

Cal Poly, Team 3-29, Amido Winter 2012 Cal Poly, Team 3-29, Amido Winter 2012 的会员

CPSU-AMIDO-W12S3G29

4 名成员

创作了14篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 497