修复你的物品 社区 商店

LG G3 Vigor Headphone Jack Replacement

简介

Use this guide to replace the headphone jack in your LG G3 Vigor.

你所需要的

  1. LG G3 Vigor Headphone Jack Replacement, Rear Case: 步骤 1 中的图像 1，1

    • Locate the notch on the bottom right of the phone.

    编辑

  2. LG G3 Vigor Headphone Jack Replacement: 步骤 2 中的图像 1，1

    • Gently pull the cover on the back of the phone off to locate the battery.

    编辑

  3. LG G3 Vigor Headphone Jack Replacement, Battery: 步骤 3 中的图像 1，1

    • Remove the battery by lifting from the slot at the bottom of the battery.

    编辑

  4. LG G3 Vigor Headphone Jack Replacement, Midframe: 步骤 4 中的图像 1，1

    • Remove the twelve Phillips #00 screws securing the midframe to the rest of the phone.

    编辑

  6. LG G3 Vigor Headphone Jack Replacement: 步骤 5 中的图像 1，3 LG G3 Vigor Headphone Jack Replacement: 步骤 5 中的图像 2，3 LG G3 Vigor Headphone Jack Replacement: 步骤 5 中的图像 3，3

    • Work a plastic opening tool around the perimeter of the phone to separate the midframe from the rest of the phone.

    编辑

  7. LG G3 Vigor Headphone Jack Replacement, Rear Facing Camera: 步骤 6 中的图像 1，1

    • Use the spudger to gently unplug the ribbon cable connected to the motherboard. Then remove the rear facing camera.

    编辑

  8. LG G3 Vigor Headphone Jack Replacement, Front Facing Camera: 步骤 7 中的图像 1，2 LG G3 Vigor Headphone Jack Replacement, Front Facing Camera: 步骤 7 中的图像 2，2

    • Use the spudger to gently unplug the ribbon cable connected to the motherboard.

    • Remove the front camera.

    编辑

  9. LG G3 Vigor Headphone Jack Replacement, Motherboard: 步骤 8 中的图像 1，1

    • Use the flat edge of a spudger to disconnect the motherboard ribbon connector.

    编辑

  10. LG G3 Vigor Headphone Jack Replacement: 步骤 9 中的图像 1，2 LG G3 Vigor Headphone Jack Replacement: 步骤 9 中的图像 2，2

    • Use the pointed end of a spudger to push back the two motherboard retaining flaps.

    • The motherboard should now be able to be lifted out of the device.

    编辑

  11. LG G3 Vigor Headphone Jack Replacement, Headphone Jack: 步骤 10 中的图像 1，1

    • Remove the headphone jack by inserting the spudger into the jack and pulling it up and out.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

Geoff Wacker

于09/30/13注册

89,956 声望

创作了89篇指南

徽章: 44

+ 41更多徽章

一条评论

Works also with D855. There are only a view differences, e.g. screws and a minimal different motherboarddesign.

flux - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 451