简介

Use this guide to replace the rear case on your LG G Watch.

  1. Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.
    • Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.

    • Be prepared to apply some pressure with your fingers to perform the following action.

    • First, slide the wristband down on the spring bar to expose the shoulder of the spring bar.

    • Grasp the exposed shoulder with the tweezers to perform the next step.

  2. This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband. Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.
    • This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband.

    • Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.

    • Now carefully pull the other end of the spring bar to detach the wristband from the watch face.

    • Repeat steps 1 and 2 for the other wristband.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Use the T5 Torx screwdriver to unscrew the four silver 2mm x 3mm T5 screws that hold the back cover in place.
    • Use the T5 Torx screwdriver to unscrew the four silver 2mm x 3mm T5 screws that hold the back cover in place.

  5. Slide the opening pick between the rear case and the rest of the device to separate the two halves. Gently pull the two halves apart.
    • Slide the opening pick between the rear case and the rest of the device to separate the two halves.

    • Gently pull the two halves apart.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Geoff Wacker

于2013年09月30日注册

74,378 信誉积分

创作了84篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 8

总计 610