跳转到主内容

简介

This guide will cover how to replace the motherboard on the LG G Pad 7.0

配件

没有特定配件。

  1. The screen assembly is secured to the plastic backing with clips.  Insert the plastic opening tool between the screen and plastic. Work your way around the device, freeing it from the connecting clips.
    • The screen assembly is secured to the plastic backing with clips. Insert the plastic opening tool between the screen and plastic.

    • Work your way around the device, freeing it from the connecting clips.

    • Be careful around the MicroSD, sim card, power, and volume buttons

    • Lift the tablet from the plastic frame. You may need to loosen some more clips if it is difficult to remove.

  2. Remove the red marked connectors by gently prying up. Be sure not to rip the ribbon cables as they are very fragile. You will have to remove the metallic tape near the bottom of the tablet to  disconnect  the display cable. Remove the three connectors marked in orange by gently prying them upwards. The cables are very fragile so be careful not to rip them.
    • Remove the red marked connectors by gently prying up. Be sure not to rip the ribbon cables as they are very fragile.

    • You will have to remove the metallic tape near the bottom of the tablet to disconnect the display cable.

    • Remove the three connectors marked in orange by gently prying them upwards. The cables are very fragile so be careful not to rip them.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Remove the 7 screws marked in red that are securing the logic board to the case. Be sure that all the connectors marked in orange are removed before pulling out the mother board.
    • Remove the 7 screws marked in red that are securing the logic board to the case.

    • Be sure that all the connectors marked in orange are removed before pulling out the mother board.

    • Very carefully remove the logic board after the screws have been removed

  5. Remove the two screw marked in red. Using the tweezers , pull out the metal bracket that holds the charging port in place. Pull out the ribbon connector in orange.
    • Remove the two screw marked in red.

    • Using the tweezers , pull out the metal bracket that holds the charging port in place.

    • Pull out the ribbon connector in orange.

    • Remove the one screw that holds the speaker in place.

    • Slowly pull out the speaker.

  6. Insert your new mother board with the 7 screws Reconnect all the connectors marked in red back to the mother board.
    • Insert your new mother board with the 7 screws

    • Reconnect all the connectors marked in red back to the mother board.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Ethan Chow

于2015年09月05日注册

1,789 信誉积分

创作了3篇指南

添加评论

浏览统计数据:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 19

总计 1,588