跳转到主内容

你所需要的

  1. LG Dare Logic Board Replacement, Battery: 步骤 1 中的图像 1,2 LG Dare Logic Board Replacement, Battery: 步骤 1 中的图像 2,2
    • Remove the back cover by firmly pressing against the raised lip on the back panel. Slide the cover towards the top of the phone.

  2. LG Dare Logic Board Replacement: 步骤 2 中的图像 1,3 LG Dare Logic Board Replacement: 步骤 2 中的图像 2,3 LG Dare Logic Board Replacement: 步骤 2 中的图像 3,3
    • Remove the battery by placing your fingernail or a opening tool in the recessed edge and lift the battery out.

  3. LG Dare Logic Board Replacement, Logic Board: 步骤 3 中的图像 1,2 LG Dare Logic Board Replacement, Logic Board: 步骤 3 中的图像 2,2
    • Use the #00 screwdriver to remove the six 4mm phillips screws located around the edges of the phone.

  4. LG Dare Logic Board Replacement: 步骤 4 中的图像 1,3 LG Dare Logic Board Replacement: 步骤 4 中的图像 2,3 LG Dare Logic Board Replacement: 步骤 4 中的图像 3,3
    • Lift the back plastic cover off by moving the opening tool around the edges of the phone.

    • Wedging the opening tool in several places on the bottom of the phone will help release small tabs that hold the back to the front frame.

    • The side buttons may fall out when removing the back plastic.

  5. LG Dare Logic Board Replacement: 步骤 5 中的图像 1,3 LG Dare Logic Board Replacement: 步骤 5 中的图像 2,3 LG Dare Logic Board Replacement: 步骤 5 中的图像 3,3
    • Pull off the back plastic panel.

    • Remove the buttons from the edge of the frame. The buttons are [lock], [volume control], [speaker], and [camera].

  6. LG Dare Logic Board Replacement: 步骤 6 中的图像 1,1
    • Disconnect the three ribbon connectors from the motherboard.

  7. LG Dare Logic Board Replacement: 步骤 7 中的图像 1,3 LG Dare Logic Board Replacement: 步骤 7 中的图像 2,3 LG Dare Logic Board Replacement: 步骤 7 中的图像 3,3
    • Remove the LED.

    • Remove the camera connector.

    • Remove the camera sensor from the logic board. Squeeze the sides of the camera sensor firmly and pull straight up.

  8. LG Dare Logic Board Replacement: 步骤 8 中的图像 1,1
    • Open the USB port cover.

  9. LG Dare Logic Board Replacement: 步骤 9 中的图像 1,3 LG Dare Logic Board Replacement: 步骤 9 中的图像 2,3 LG Dare Logic Board Replacement: 步骤 9 中的图像 3,3
    • Use the opening tool to lift up the green logic board in all areas and remove it.

    • The logic board may require some force to remove because it is taped to the plastic frame.

    • When removing the logic board, be careful not to tear any of the ribbon cables or side buttons.

结论

To re-assemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Haoyan Huang

于2012年01月26日注册

124 声望

创作了4篇指南

团队

Cal Poly, Team 9-4, Regan Winter 2012 Cal Poly, Team 9-4, Regan Winter 2012 的会员

CPSU-REGAN-W12S9G4

5 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 1

过去 30 天: 2

总计 2,101