修复你的物品 社区 商店

LG Cosmos Silicon Keypad Replacement

简介

If the QWERTY silicon keypad is worn out or damaged, it is replaceable. It requires time and a lot of disassembling.

你所需要的

  1. LG Cosmos Silicon Keypad Replacement, Battery: 步骤 1 中的图像 1，1

    • Apply an upward force to slide the back cover off.

    编辑

  2. LG Cosmos Silicon Keypad Replacement: 步骤 2 中的图像 1，1

    • Use your finger to push down on the top of the battery and pull it out.

    编辑

  3. LG Cosmos Silicon Keypad Replacement, Rear Case: 步骤 3 中的图像 1，1

    • Remove the five 3.0mm Phillips #000 screws along the edge of the rear case.

    编辑

  4. LG Cosmos Silicon Keypad Replacement: 步骤 4 中的图像 1，1

    • Use a plastic opening tool to pry the rear case loose.

    编辑

  6. LG Cosmos Silicon Keypad Replacement: 步骤 5 中的图像 1，1

    • Once the rear case is loose, lift it from the rest of the phone.

    编辑

  7. LG Cosmos Silicon Keypad Replacement, Motherboard: 步骤 6 中的图像 1，1

    • Remove the two 2.9 mm Phillips #000 screws that are slightly off-centered to the right.

    编辑

  8. LG Cosmos Silicon Keypad Replacement: 步骤 7 中的图像 1，1

    • Use the plastic opening tool to pry the motherboard loose.

    编辑

  9. LG Cosmos Silicon Keypad Replacement: 步骤 8 中的图像 1，1

    • Hold the motherboard from the top and bottom and slowly lift the motherboard until you feel a pull.

    • The flex cable is attached at the bottom of the motherboard and can be damaged if too much lifting force is applied.

    编辑

  10. LG Cosmos Silicon Keypad Replacement: 步骤 9 中的图像 1，1

    • Once the motherboard is lifted , rotate the motherboard up 90 degrees to the right.

    编辑

  11. LG Cosmos Silicon Keypad Replacement: 步骤 10 中的图像 1，1

    • Use your finger to pull the flex cable out from its connector.

    编辑

  12. LG Cosmos Silicon Keypad Replacement: 步骤 11 中的图像 1，1

    • Pull the motherboard away from the rest of the phone.

    编辑

  13. LG Cosmos Silicon Keypad Replacement, Silicon Keypad: 步骤 12 中的图像 1，1

    • Lift the silicon keypad away from the rest of the phone.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Johnny Phane

于04/15/13注册

70 声望

创作了5篇指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team 13-63, Johann Spring 2013 Cal Poly, Team 13-63, Johann Spring 2013 的会员

CPSU-JOHANN-S13S13G63

3 名成员

创作了10篇指南

一条评论

Steps 10 and 11 are not necessary for replacing just the silicone keypad. As long as you are careful not to pull on the motherboard, once you have the motherboard rotated up, you are able to replace the silicone keypad directly from that point.

Randy - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 849