简介

How to remove the keypad from an LG CG180 cell phone.

  1. Power down the cell phone by pressing and holding down the red "end call" button.
    • Power down the cell phone by pressing and holding down the red "end call" button.

    添加评论

  2. Turn the phone screen-down so you are looking at the back cover.
    • Turn the phone screen-down so you are looking at the back cover.

    添加评论

    • Slide the back cover down using your finger to remove the cover from the phone.

    添加评论

    • Place your finger at the top of the battery in small gap.

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Press downward while pulling outward to remove the battery.

    添加评论

    • Remove all four screws on the back of the phone using a Phillips #00 screwdriver.

    添加评论

    • Insert a plastic opening tool in the seam.

    添加评论

    • Run the tool along the seam to release all the tabs.

    添加评论

    • Pull the phone back cover off once all the tabs are released.

    添加评论

    • Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.

    添加评论

    • The hardshell case is separated from the rest of the phone.

    添加评论

    • Separate keypad from circuit board by turning it upside down and allowing it to fall off.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Alex Jacobs

于2010年01月21日注册

5 信誉积分

创作了4篇指南

团队

Cal Poly, Team 14-42, Regan Winter 2010 Cal Poly, Team 14-42, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G42

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,314