跳转到主内容

Kyocera QCP-2035 Speaker Replacement

你所需要的

  1. Kyocera QCP-2035 Speaker Replacement, Remove Back Cover: 步骤 1 中的图像 1,3 Kyocera QCP-2035 Speaker Replacement, Remove Back Cover: 步骤 1 中的图像 2,3 Kyocera QCP-2035 Speaker Replacement, Remove Back Cover: 步骤 1 中的图像 3,3
    • When looking at the back of the phone, you will see a horizontal line and three raised segments of plastic in the form of a triangle.

    • Place thumb on top of the triangle and press into the phone while sliding your thumb towards the bottom of the phone.

    • In 5 mm it will stop sliding.

  2. Kyocera QCP-2035 Speaker Replacement: 步骤 2 中的图像 1,3 Kyocera QCP-2035 Speaker Replacement: 步骤 2 中的图像 2,3 Kyocera QCP-2035 Speaker Replacement: 步骤 2 中的图像 3,3
    • Grab the bottom of the back cover with your other hand and pull the cover the rest of the way off.

    • Turn the phone over slowly. The battery will fall out on its own.

  3. Kyocera QCP-2035 Speaker Replacement: 步骤 3 中的图像 1,3 Kyocera QCP-2035 Speaker Replacement: 步骤 3 中的图像 2,3 Kyocera QCP-2035 Speaker Replacement: 步骤 3 中的图像 3,3
    • Rotate the phone so the bottom is facing you. There is a small indent on the plastic face.

    • Using the tip of your fingernail or a spudger, pry the cover away from the rest of the phone.

    • Once the cover starts to part, keep separating until the top notches detach.

  4. Kyocera QCP-2035 Speaker Replacement: 步骤 4 中的图像 1,3 Kyocera QCP-2035 Speaker Replacement: 步骤 4 中的图像 2,3 Kyocera QCP-2035 Speaker Replacement: 步骤 4 中的图像 3,3
    • With the cover plate separated, you will see (6) T6x11mm torx screws recessed in the white plastic.

    • Remove screws.

    • The white plastic face plate lifts right off, exposing the main board.

  5. Kyocera QCP-2035 Speaker Replacement, Speaker: 步骤 5 中的图像 1,3 Kyocera QCP-2035 Speaker Replacement, Speaker: 步骤 5 中的图像 2,3 Kyocera QCP-2035 Speaker Replacement, Speaker: 步骤 5 中的图像 3,3
    • Locate the speaker at the top of the phone right above the screen.

    • Using a spudger or pair of tweezers, gently rock and pry from between the speaker and the main board.

    • There are three plastic tabs holding the speaker, which are located at the back of the speaker.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Jeremiah

于01/21/15注册

122 声望

撰写一个指南

团队

USF Tampa, Team 5-3, Brown Winter 2015 USF Tampa, Team 5-3, Brown Winter 2015 的会员

USFT-BROWN-W15S5G3

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 132