简介
Follow this guide to remove or replace the on/off switch on a 2014 Kushlan cement mixer model 600DDS.
To prevent electric shock, leave the device unplugged for 20 minutes to allow the capacitor to discharge before you begin.
你所需要的
-
-
Use a 13 mm socket to remove the two bolts securing the motor cover to the frame.
-
-
-
Use a Phillips screwdriver to remove the four screws securing the electrical panel.
-
-
-
-
Use a pair of needle-nose pliers to disconnect the four wires from the back of the on/off switch.
-
即将完成！
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
