修复你的物品 社区 商店

Kurio 7 Back Panel Replacement

简介

If the back panel of your Kurio 7 is broken, this is an easy process to replace it. This also serves as a guide to opening the device for other repairs and replacements.

你所需要的

  1. Kurio 7 Back Panel Replacement, Back Panel: 步骤 1 中的图像 1，3 Kurio 7 Back Panel Replacement, Back Panel: 步骤 1 中的图像 2，3 Kurio 7 Back Panel Replacement, Back Panel: 步骤 1 中的图像 3，3

    • Begin by removing the rubber cover from the Kurio 7.

    编辑

  2. Kurio 7 Back Panel Replacement: 步骤 2 中的图像 1，2 Kurio 7 Back Panel Replacement: 步骤 2 中的图像 2，2

    • Remove the four 30 mm Phillips #00 screws from the outer case.

    编辑

  4. Kurio 7 Back Panel Replacement: 步骤 3 中的图像 1，2 Kurio 7 Back Panel Replacement: 步骤 3 中的图像 2，2

    • Insert the plastic opening tool in the gap between the front cover and the back cover of the device.

    • Slide the plastic opening tool around the edge of the device. Gently pry apart the tabs that hold the front cover and the back cover together.

    • Be careful not to break off the tabs that hold the front cover and the back cover together.

    编辑

  5. Kurio 7 Back Panel Replacement: 步骤 4 中的图像 1，2 Kurio 7 Back Panel Replacement: 步骤 4 中的图像 2，2

    • Once all of the tabs are removed, the back cover should come off easily.

    • Gently remove the back cover. There are wires inside that may get caught on the cover while removing it. These wires are soldered to their components and are difficult to reattach.

    编辑
结论

Replace with a new back panel. To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与10其他贡献者

Eric Rice

于04/14/14注册

913 声望

创作了3篇指南

徽章: 20

+ 17更多徽章

团队

Cal Poly, Team 12-36, Maness Spring 2014 Cal Poly, Team 12-36, Maness Spring 2014 的会员

CPSU-MANESS-S14S12G36

4 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 2

过去 30 天： 7

总计 2,559