跳转到主内容

你所需要的

  1. Korg Toneworks AX1500G Pedal Switch Replacement, Pedal Switch: 步骤 1 中的图像 1,1
    • Remove the black 8.0mm Phillips screws from the back of the Pedal Board.

    • Be careful when working with small electronics, as many of the components are fragile.

  2. Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 2 中的图像 1,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 2 中的图像 2,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 2 中的图像 3,3
    • Remove the back panel of the board.

  3. Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 3 中的图像 1,1
    • Unscrew the five golden 8.0mm Phillips screws holding down the left circuit board.

    • Be careful not to hit to metal parts on the circuit board, this could cause sparks and failure.

  4. Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 4 中的图像 1,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 4 中的图像 2,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 4 中的图像 3,3
    • Carefully unplug three wires connecting the left circuit board to the right circuit board.

    • The wires may be stuck and difficult to remove. Try to pull from the plastic part.

  5. Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 5 中的图像 1,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 5 中的图像 2,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 5 中的图像 3,3
    • The circuit board is still connected at this point.

    • Carefully pull out the circuit board and turn it over.

    • Unplug the last cable connecting it to the other large circuit board.

  6. Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 6 中的图像 1,1
    • Unscrew the two 8.0 mm black Phillips screws from the small circuit board.

  7. Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 7 中的图像 1,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 7 中的图像 2,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 7 中的图像 3,3
    • Gently pull out the small circuit board by the purple wire.

  8. Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 8 中的图像 1,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 8 中的图像 2,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 8 中的图像 3,3
    • Mark the wire connected to the small circuit board so for future reference.

  9. Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 9 中的图像 1,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 9 中的图像 2,3 Korg Toneworks AX1500G Pedal Switch Replacement: 步骤 9 中的图像 3,3
    • Soldering Irons can be very dangerous if you are inexperienced.

    • Desolder the wires connecting to the board and remove the board.

    • Solder the new foot switch circuit on

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Gabriel Maraboto

于2015年09月29日注册

200 声望

撰写一个指南

团队

Cal Poly, Team 14-6, Green Fall 2015 Cal Poly, Team 14-6, Green Fall 2015 的会员

CPSU-GREEN-F15S14G6

5 名成员

创作了6篇指南

3条评论

Thanks! My Ax1500g's pedal switch volume is failing, and not reaching the 100% volume, not even 50%. I've opened the pedalboard and removed the pedal switch, but I notice It doesn't have any true connection to the switchboard but an LED with a PhotoSensor that may be blocked by a plastic in the pedal itself, is that how it works? I was expecting a Potenciometer.

Where can I buy the pedal switch board replacement?

309001200 PHOTO TR RPM-22PB N OR P KLM-2251 AX150 1

312051900 PHOTO SENSOR SIM-22ST Q OR R KLM-2251 AX150 1

Thanks

Martin Jofre - 回复

Bro

Thers is some noise comeing when i connect the cable

I give to one shop

3 times. I took the shop he is cheater i lost my money

I need to fix it bro

I need ur help

Samuel Arun - 回复

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 14

过去 30 天: 54

总计 4,252