跳转到主内容

简介

The rubber grip, located on the front of your Kodak PixPro AZ251, gives you a better grip of the camera. This guide will instruct you on how to remove the rubber pad.

配件

没有特定配件。

  1. Slide switch to open lock position. Slide switch to open lock position.
    • Slide switch to open lock position.

  2. Press down on the battery cover and slide outwards to open. Press down on the battery cover and slide outwards to open.
    • Press down on the battery cover and slide outwards to open.

  3. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  4. Remove the batteries.
    • Remove the batteries.

  5. Insert the plastic opening tool underneath the rubber on the bottom corner.
    • Insert the plastic opening tool underneath the rubber on the bottom corner.

  6. Slide the plastic opening tool along the perimeter of the rubber grip to unbind the glue. Slide the plastic opening tool along the perimeter of the rubber grip to unbind the glue. Slide the plastic opening tool along the perimeter of the rubber grip to unbind the glue.
    • Slide the plastic opening tool along the perimeter of the rubber grip to unbind the glue.

  7. Pry upwards until you can grip the rubber enough to pull off. Pry upwards until you can grip the rubber enough to pull off. Pry upwards until you can grip the rubber enough to pull off.
    • Pry upwards until you can grip the rubber enough to pull off.

结论

To reassemble your device, follow these instructions in reverse order.

Luiza Oliveira

于2018年02月22日注册

205 信誉积分

创作了2篇指南

团队

USF Tampa, Team S1-G1, Cagle Spring 2018 USF Tampa, Team S1-G1, Cagle Spring 2018 的会员

USFT-CAGLE-S18S1G1

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 67