简介

Replace unusable or damaged button.

配件

无需配件。

Open the battery cover.
  • Open the battery cover.

添加评论

Slide the orange latch sideways to eject the battery.
  • Slide the orange latch sideways to eject the battery.

  • Remove the battery.

添加评论

Remove 7 screws. 1 (6.25 mm) screw located on the top right corner, next to the view screen. 4 (4.45mm) screws on the bottom of the camera.
  • Remove 7 screws.

    • 1 (6.25 mm) screw located on the top right corner, next to the view screen.

    • 4 (4.45mm) screws on the bottom of the camera.

    • 2 (2.95mm) screws on the left side of the camera.

添加评论

There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard. There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard. There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard.
  • There will be 2 (5.39mm) screws. Remove the screws in order to remove the lanyard.

添加评论

Remove the rear camera casing. Remove the front casing.
  • Remove the rear camera casing.

  • Remove the front casing.

添加评论

Remove the top panel screw (1x 4.37mm). Remove the top panel screw (1x 4.37mm).
  • Remove the top panel screw (1x 4.37mm).

添加评论

Remove the top panel. Remove the top panel.
  • Remove the top panel.

添加评论

Remove the back panel screws (1x 3.33mm, and  1x 3.40mm). Remove the back panel screws (1x 3.33mm, and  1x 3.40mm).
  • Remove the back panel screws (1x 3.33mm, and 1x 3.40mm).

添加评论

Separate the inner casing  from the tripod mount. Separate the inner casing  from the tripod mount. Separate the inner casing  from the tripod mount.
  • Separate the inner casing from the tripod mount.

添加评论

Gently pull the  orange tab out of the  circuit board. Gently pull the  orange tab out of the  circuit board. Gently pull the  orange tab out of the  circuit board.
  • Gently pull the orange tab out of the circuit board.

添加评论

Carefully flip the LCD panel to expose the central circuit board. Carefully flip the LCD panel to expose the central circuit board.
  • Carefully flip the LCD panel to expose the central circuit board.

添加评论

Remove the (1x 3.33mm) screw from the menu button panel .
  • Remove the (1x 3.33mm) screw from the menu button panel .

添加评论

Pull the second orange tab from the circuit board and remove the buttons. Pull the second orange tab from the circuit board and remove the buttons.
  • Pull the second orange tab from the circuit board and remove the buttons.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Michael

于2010年06月24日注册

63 信誉积分

创作了2篇指南

团队

Cal Poly, Team 2-8, Johann Summer 2010 Cal Poly, Team 2-8, Johann Summer 2010 的会员

CPSU-JOHANN-R10S2G8

5 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,197