简介

Use this guide to remove and install the front case.

配件

无需配件。

Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
  • Position the camera with the bottom facing up.

  • With your finger, slide the battery cover in the direction of open arrow.

  • The battery cover will spring open, so be careful to lift it up gently.

添加评论

Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
  • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

添加评论

Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
  • Firmly grasp and pull back casing off.

添加评论

With battery door open, grasp the front case and remove it from the camera. With battery door open, grasp the front case and remove it from the camera. With battery door open, grasp the front case and remove it from the camera.
  • With battery door open, grasp the front case and remove it from the camera.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Dustin Rodgers

于2010年10月05日注册

50 信誉积分

创作了4篇指南

团队

Cal Poly, Team 7-51, Amido Fall 2010 Cal Poly, Team 7-51, Amido Fall 2010 的会员

CPSU-AMIDO-F10S7G51

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 2

总计 2,627