简介

How to remove the buttons.

配件

无需配件。

  1. Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
    • Position the camera with the bottom facing up.

    • With your finger, slide the battery cover in the direction of open arrow.

    • The battery cover will spring open, so be careful to lift it up gently.

  2. Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
    • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

      • There are 2 on the left

      • There are 2 on the right

      • There are 3 on the bottom

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
    • Firmly grasp and pull back casing off.

  5. Use #00 screwdriver to pry off buttons. Use #00 screwdriver to pry off buttons. Use #00 screwdriver to pry off buttons.
    • Use #00 screwdriver to pry off buttons.

结论

To reassemble your device, follow these instructions in reverse order.

Alan Galarza

于2010年10月03日注册

69 信誉积分

创作了3篇指南

团队

Cal Poly, Team 7-51, Amido Fall 2010 Cal Poly, Team 7-51, Amido Fall 2010 的会员

CPSU-AMIDO-F10S7G51

4 名成员

创作了7篇指南

Thank you this was very helpful!

carolnelson - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,178