跳转到主内容

简介

This guide will show you how to take out and replace the LCD screen on your camera.

配件

没有特定配件。

  1. To start, remove the Philips #00 4.5 mm screws on both sides of the camera. On the bottom, there are three Philips #00 4.5 mm screws.  Two are for the front panel and one is for the back panel.  To remove the back panel, take out the screws indicated in the final picture of the sequence. On the bottom, there are three Philips #00 4.5 mm screws.  Two are for the front panel and one is for the back panel.  To remove the back panel, take out the screws indicated in the final picture of the sequence.
    • To start, remove the Philips #00 4.5 mm screws on both sides of the camera.

    • On the bottom, there are three Philips #00 4.5 mm screws. Two are for the front panel and one is for the back panel. To remove the back panel, take out the screws indicated in the final picture of the sequence.

  2. Once all the screws are out, remove the back panel. The front panel does not need to be removed for replacing the LCD or the Lens. To do this, start by removing the bottom of the panel.
    • Once all the screws are out, remove the back panel.

    • The front panel does not need to be removed for replacing the LCD or the Lens.

    • To do this, start by removing the bottom of the panel.

  3. Once the bottom part is unhooked, unhook the top, and the whole panel should come off. Be sure to gently pry the cover off.
    • Once the bottom part is unhooked, unhook the top, and the whole panel should come off.

    • Be sure to gently pry the cover off.

  4. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  5. In the top right hand corner of the inside of the camera, there is a Philips #00 4 mm screw that needs to be removed.
    • In the top right hand corner of the inside of the camera, there is a Philips #00 4 mm screw that needs to be removed.

  6. The next step is to remove the white ribbon on the upper right hand corner next to the LCD screen. This can be done with or without tweezers. The screen is still attached at the bottom, so do not take the screen off yet.
    • The next step is to remove the white ribbon on the upper right hand corner next to the LCD screen.

    • This can be done with or without tweezers.

    • The screen is still attached at the bottom, so do not take the screen off yet.

  7. Carefully pry the top portion of the screen from the camera. The screen is still attached to the camera via a yellow ribbon at the bottom of the camera. The screen is still attached to the camera via a yellow ribbon at the bottom of the camera.
    • Carefully pry the top portion of the screen from the camera.

    • The screen is still attached to the camera via a yellow ribbon at the bottom of the camera.

  8. To remove the screen completely, push down on the rectangular tab indicated in the picture. To remove the screen completely, push down on the rectangular tab indicated in the picture. To remove the screen completely, push down on the rectangular tab indicated in the picture.
    • To remove the screen completely, push down on the rectangular tab indicated in the picture.

  9. The LCD screen is now completely removed from the rest of the camera. The LCD screen is now completely removed from the rest of the camera.
    • The LCD screen is now completely removed from the rest of the camera.

结论

To reassemble your device, follow these instructions in reverse order. NOTE: be sure to put the internal screws on the inside and the external screws on the outside.

3等其他人完成本指南。

Alyssa

于2012年04月12日注册

69 信誉积分

创作了4篇指南

团队

Cal Poly, Team 6-22, Amido Spring 2012 Cal Poly, Team 6-22, Amido Spring 2012 的会员

CPSU-AMIDO-S12S6G22

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 2,256