跳转到主内容

KitchenAid Professional 600 Worm Gear Replacement

你所需要的

  1. KitchenAid Professional 600 Worm Gear Replacement, Top Cover: 步骤 1 中的图像 1,1
    • Take out the screw which holds on the silver band using a Phillips #2 screwdriver.

    • Remove the silver band.

  2. KitchenAid Professional 600 Worm Gear Replacement: 步骤 2 中的图像 1,1
    • Remove the four Phillips #2 screws located around the mixer where the band was removed.

    • This picture only shows two of the screw that you need to remove. The other two are on the exact opposite side of the mixer.

  3. KitchenAid Professional 600 Worm Gear Replacement: 步骤 3 中的图像 1,1
    • Remove the top of the mixer to reveal the inner parts.

    • The top should lift off, but may not if it is stuck. A sharp strike from the back with the hand may unstick it. It will slide forward about a 3/8 of an inch. Push it back again from the front and it should be free enough to lift.

  4. KitchenAid Professional 600 Worm Gear Replacement, Gear Housing Cover: 步骤 4 中的图像 1,1
    • Remove the 4 Phillips #2 screws connecting the black housing cover to the device.

    • Only one of the screws is seen in the picture. The other three are also located around the black housing cover.

  5. KitchenAid Professional 600 Worm Gear Replacement: 步骤 5 中的图像 1,1
    • Take off the black housing cover.

  6. KitchenAid Professional 600 Worm Gear Replacement, Worm Gear: 步骤 6 中的图像 1,1
    • Remove the Worm Gear.

    • The Worm Gear is the part that is lying horizontal.

    • Remember to apply food safe grease onto your new replacement part before assembling the device back together.

结论

To reassemble your device, follow these instructions in reverse order.

9等其他人完成本指南。

Luke

于04/11/16注册

1,353 声望

创作了5篇指南

团队

Cal Poly, Team 25-4, Maness Spring 2016 Cal Poly, Team 25-4, Maness Spring 2016 的会员

CPSU-MANESS-S16S25G4

4 名成员

创作了18篇指南

一条评论

No tiene ningún tornillo a los lado eso es mentira

Guillermo Perez - 回复

添加评论

浏览统计数据:

过去 24 小时: 7

过去 7 天: 77

过去 30 天: 233

总计 18,971