修复你的物品 社区 商店

KitchenAid Professional 600 Top Cover Replacement

简介

Outline what you are going to teach someone how to do.

你所需要的

  1. KitchenAid Professional 600 Top Cover Replacement, Top Cover: 步骤 1 中的图像 1，1

    • Take out the screw which holds on the silver band using a Phillips #2 screwdriver.

    • Remove the silver band.

    编辑

  3. KitchenAid Professional 600 Top Cover Replacement: 步骤 2 中的图像 1，1

    • Remove the four Phillips #2 screws located around the mixer where the band was removed.

    • This picture only shows two of the screw that you need to remove. The other two are on the exact opposite side of the mixer.

    编辑

  4. KitchenAid Professional 600 Top Cover Replacement: 步骤 3 中的图像 1，1

    • Remove the top of the mixer to reveal the inner parts.

    • The top should lift off, but may not if it is stuck. A sharp strike from the back with the hand may unstick it. It will slide forward about a 3/8 of an inch. Push it back again from the front and it should be free enough to lift.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与4其他贡献者

Luke

于04/11/16注册

1,353 声望

创作了5篇指南

徽章: 19

+ 16更多徽章

团队

Cal Poly, Team 25-4, Maness Spring 2016 Cal Poly, Team 25-4, Maness Spring 2016 的会员

CPSU-MANESS-S16S25G4

4 名成员

创作了18篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 10

过去 30 天： 44

总计 2,473