修复你的物品 社区 商店

KitchenAid Professional 600 Gear Housing Cover Replacement

你所需要的

  1. KitchenAid Professional 600 Gear Housing Cover Replacement, Top Cover: 步骤 1 中的图像 1，1

    • Take out the screw which holds on the silver band using a Phillips #2 screwdriver.

    • Remove the silver band.

    编辑

  2. KitchenAid Professional 600 Gear Housing Cover Replacement: 步骤 2 中的图像 1，1

    • Remove the four Phillips #2 screws located around the mixer where the band was removed.

    • This picture only shows two of the screw that you need to remove. The other two are on the exact opposite side of the mixer.

    编辑

  4. KitchenAid Professional 600 Gear Housing Cover Replacement: 步骤 3 中的图像 1，1

    • Remove the top of the mixer to reveal the inner parts.

    • The top should lift off, but may not if it is stuck. A sharp strike from the back with the hand may unstick it. It will slide forward about a 3/8 of an inch. Push it back again from the front and it should be free enough to lift.

    编辑

  5. KitchenAid Professional 600 Gear Housing Cover Replacement, Gear Housing Cover: 步骤 4 中的图像 1，1

    • Remove the 4 Phillips #2 screws connecting the black housing cover to the device.

    • Only one of the screws is seen in the picture. The other three are also located around the black housing cover.

    编辑

  6. KitchenAid Professional 600 Gear Housing Cover Replacement: 步骤 5 中的图像 1，1

    • Take off the black housing cover.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Luke

于04/11/16注册

1,353 声望

创作了5篇指南

徽章: 19

+ 16更多徽章

团队

Cal Poly, Team 25-4, Maness Spring 2016 Cal Poly, Team 25-4, Maness Spring 2016 的会员

CPSU-MANESS-S16S25G4

4 名成员

创作了18篇指南

一条评论

I find your instructions very helpful but one of my housing pins have broken off, Can it be replaced or do I need to replace the housing? If so where do I find the housing part. I can not find it.

w.gupton - 回复

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 11

过去 30 天： 32

总计 2,811