跳转到主内容

KitchenAid KSB5CR Power Cable Replacement

你所需要的

  1. KitchenAid KSB5CR Power Cable Replacement, Removing the Back Panel Part 1: 步骤 1 中的图像 1,3 KitchenAid KSB5CR Power Cable Replacement, Removing the Back Panel Part 1: 步骤 1 中的图像 2,3 KitchenAid KSB5CR Power Cable Replacement, Removing the Back Panel Part 1: 步骤 1 中的图像 3,3
    • Remove the glass container and place the blender upside down on a solid surface.

    • Remove the four rubber feet using the needle nose pliers.

    • Remove the four #7.5 Phillips 25mm screws that were located underneath the rubber feet using the Phillips #2 screwdriver.

  2. KitchenAid KSB5CR Power Cable Replacement, Removing the Back Panel Part 2: 步骤 2 中的图像 1,1
    • Lift the back panel up, sliding it along the power cord.

  3. KitchenAid KSB5CR Power Cable Replacement, Freeing the Power Cable: 步骤 3 中的图像 1,1
    • Lift up on the power cable to pop it out of its holder.

  4. KitchenAid KSB5CR Power Cable Replacement, Detaching the White and Black Wires: 步骤 4 中的图像 1,2 KitchenAid KSB5CR Power Cable Replacement, Detaching the White and Black Wires: 步骤 4 中的图像 2,2
    • Be gentle with the knife or you will break the circuit board.

    • Slide the knife into the metal loop holding the insulation before the white copper wire, and wiggle it back and forth until it loosens.

    • Pull the wire out from the metal loop that you loosened.

    • Repeat this process with the black copper wire.

  5. KitchenAid KSB5CR Power Cable Replacement, Detatching the Green Wire: 步骤 5 中的图像 1,2 KitchenAid KSB5CR Power Cable Replacement, Detatching the Green Wire: 步骤 5 中的图像 2,2
    • Using the Phillips #2 screwdriver, remove the #8 Phillips 6mm screw to which the green wire is attached.

结论

To reassemble your device, follow these instructions in reverse order.

Cameron Geehr

于09/28/14注册

745 声望

创作了6篇指南

团队

Cal Poly, Team 12-5, Forte Fall 2014 Cal Poly, Team 12-5, Forte Fall 2014 的会员

CPSU-FORTE-F14S12G5

5 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 4

总计 651