跳转到主内容

简介

This guide will illustrate how to replace the motor on the KitchenAid KHM512ER.

  1. KitchenAid KHM512ER Motor Replacement, Motor: 步骤 1 中的图像 1,2 KitchenAid KHM512ER Motor Replacement, Motor: 步骤 1 中的图像 2,2
    • Insert the back of a plastic opening tool into one of the beater holes

    • Apply force to pull the circular plastic part off.

    • If necessary, use the other side of the plastic opening tool to pry the circular plastic part off.

  2. KitchenAid KHM512ER Motor Replacement: 步骤 2 中的图像 1,2 KitchenAid KHM512ER Motor Replacement: 步骤 2 中的图像 2,2
    • Use a Phillips 2 screwdriver to remove the two 20mm screws holding the bottom plastic piece in place.

    • Remove the bottom plastic piece using a plastic opening tool.

    • Your screwdriver may not be long or narrow enough to reach the screws in these holes. If that's the case, use another screwdriver.

  3. KitchenAid KHM512ER Motor Replacement: 步骤 3 中的图像 1,2 KitchenAid KHM512ER Motor Replacement: 步骤 3 中的图像 2,2
    • Using a Phillips 2 screwdriver, remove the three 20mm screws holding the motor assembly in place.

    • Use your hands to remove the motor assembly and circuit board.

  4. KitchenAid KHM512ER Motor Replacement: 步骤 4 中的图像 1,3 KitchenAid KHM512ER Motor Replacement: 步骤 4 中的图像 2,3 KitchenAid KHM512ER Motor Replacement: 步骤 4 中的图像 3,3
    • Firmly grip the motor in your hand. Using pliers, pull the connectors off the motors.

    • Some force may be required. Be careful not to cut yourself on any electrical components.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

[deleted]

于2016年02月10日注册

119 声望

撰写一个指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 18

过去 30 天: 67

总计 3,868