跳转到主内容

简介

Are your beaters not staying in? You may need to replace the beater rings.

  1. Insert the back of a plastic opening tool into one of the beater holes Apply force to pull the circular plastic part off.
    • Insert the back of a plastic opening tool into one of the beater holes

    • Apply force to pull the circular plastic part off.

    • If necessary, use the other side of the plastic opening tool to pry the circular plastic part off.

  2. Use a Phillips #2 screwdriver to remove the two 20mm screws holding the bottom plastic piece in place. Remove the bottom plastic piece using a plastic opening tool.
    • Use a Phillips #2 screwdriver to remove the two 20mm screws holding the bottom plastic piece in place.

    • Remove the bottom plastic piece using a plastic opening tool.

  3. Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place. Use your hands to remove the motor assembly.
    • Using a Phillips 2 screwdriver, remove the three 20.0mm screws holding the motor assembly in place.

    • Use your hands to remove the motor assembly.

  4. Firmly grip the motor in your hand. Using pliers, pull the connectors off the motors. Some force may be required. Be careful not to cut yourself on any electrical components.
    • Firmly grip the motor in your hand. Using pliers, pull the connectors off the motors.

    • Some force may be required. Be careful not to cut yourself on any electrical components.

  5. Lie the motor down flat on a table. Using a pair of tweezers, remove the ring from the plastic knob.
    • Lie the motor down flat on a table.

    • Using a pair of tweezers, remove the ring from the plastic knob.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Brad Daniels

于2016年02月10日注册

549 信誉积分

创作了3篇指南

团队

USF Tampa, Team 2-3, Sullivan Spring 2016 USF Tampa, Team 2-3, Sullivan Spring 2016 的会员

USFT-SULLIVAN-S16S2G3

3 名成员

创作了4篇指南

3条评论

Anyone know of a site that sells replacement beater gears?

joescherzo - 回复

Nice set by step process but where does one get the rings?

M Stevens - 回复

try Sears parts.com

Yvette Tower - 回复

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 23

过去的30天: 84

总计 4,763