跳转到主内容

KitchenAid Classic Mixer K45SSWH Gasket Replacement

你所需要的

  1. KitchenAid Classic Mixer K45SSWH Gasket Replacement, Motor Housing Cover: 步骤 1 中的图像 1,2 KitchenAid Classic Mixer K45SSWH Gasket Replacement, Motor Housing Cover: 步骤 1 中的图像 2,2
    • Using a spudger, gently pry off the aluminum drip ring.

  2. KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 2 中的图像 1,1
    • Using a 4 mm pin punch and hammer, hammer the pin until it is dislodged from the planetary gear cover.

  3. KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 3 中的图像 1,2 KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 3 中的图像 2,2
    • Using a spudger, pry the planetary gear cover from the mixer shaft.

  4. KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 4 中的图像 1,1
    • Using a flathead screwdriver, remove the five 28 mm front motor housing screws.

    • Using the same flathead screwdriver, remove the two 28 mm locking screws.

    • One of the locking screws contains a safety locking mechanism. Do not interchange these screws with the front motor housing screws.

  5. KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 5 中的图像 1,1
    • Turn your device around. Using the same flathead screwdriver, remove the two 28 mm rear locking screws.

    • One of the rear motor housing screws contains a safety locking mechanism. Do not interchange these screws with the front motor housing screws.

  6. KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 6 中的图像 1,2 KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 6 中的图像 2,2
    • Using a Phillips #2 screwdriver, remove the 10 mm screw from top of back cover.

    • The rear cover is now completely free from the mixer.

  7. KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 7 中的图像 1,2 KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 7 中的图像 2,2
    • Carefully pull the power cord from the notch in back of the mixer.

    • The motor housing cover is now completely free from the base of the mixer.

  8. KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 8 中的图像 1,1
    • Lift the motor housing cover from the mixer base.

    • Be sure to place the cover upside-down to prevent grease from leaking out.

  9. KitchenAid Classic Mixer K45SSWH Gasket Replacement, Gasket: 步骤 9 中的图像 1,2 KitchenAid Classic Mixer K45SSWH Gasket Replacement, Gasket: 步骤 9 中的图像 2,2
    • Use a butter knife or putty knife to remove grease from around the gasket.

    • Place grease in motor housing cover.

  10. KitchenAid Classic Mixer K45SSWH Gasket Replacement: 步骤 10 中的图像 1,1
    • Lift the gasket up with your hands or a spuger and remove it.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Joey Gavin

于10/13/14注册

244 声望

撰写一个指南

团队

Cal Poly, Team 14-28, Maness Fall 2014 Cal Poly, Team 14-28, Maness Fall 2014 的会员

CPSU-MANESS-F14S14G28

4 名成员

创作了22篇指南

2条评论

I got all the way to the last step of replacing the pin when i notice the mixer seemed to lock there in place and not move. What did i do wrong?

Dawn dawn6463@yahoo.com

Dawn Bennett - 回复

Hi there - There is a gasket around the engine part that you can see in step 7. Mine tore when I removed it. Is that a bad thing? I put the machine back together and it seems to work.

RES - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 18

过去 30 天: 101

总计 9,201