修复你的物品 社区 商店

Kingston HyperX Cloud II Microphone Wire Repair

简介

If your Kingston HyperX Cloud II microphone is having connection issues, use this guide to replace or reconnect your microphone wire to the driver. Inside the driver, the red wire is the wire that must be soldered to the driver for the microphone to be repaired. This problem occurs when the red wire gets disconnected from the speaker or stops working from natural causes.

你所需要的

  1. Kingston HyperX Cloud II Microphone Wire Repair, Kingston HyperX Cloud II Microphone Wire Repair: 步骤 1 中的图像 1，1

    • Pulling along the edges, take off the padding.

    编辑

  2. Kingston HyperX Cloud II Microphone Wire Repair: 步骤 2 中的图像 1，2 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 2 中的图像 2，2

    • Use a Phillips #0 screwdriver to remove the two 11 mm screws from the bracket support.

    编辑

  3. Kingston HyperX Cloud II Microphone Wire Repair: 步骤 3 中的图像 1，3 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 3 中的图像 2，3 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 3 中的图像 3，3

    • Remove the inside bracket support and then remove the outside bracket support. Then set it to the side.

    • After removing the bracket support. Expand and remove the microphone speaker from the frame.

    编辑

  5. Kingston HyperX Cloud II Microphone Wire Repair: 步骤 4 中的图像 1，3 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 4 中的图像 2，3 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 4 中的图像 3，3

    • Use a Phillips #1 screwdriver to remove the two 7.9 mm screws from the red support attached to the microphone speaker.

    编辑

  6. Kingston HyperX Cloud II Microphone Wire Repair: 步骤 5 中的图像 1，3 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 5 中的图像 2，3 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 5 中的图像 3，3

    • Separate the red frame support from the microphone speaker by putting it to the side.

    编辑

  7. Kingston HyperX Cloud II Microphone Wire Repair: 步骤 6 中的图像 1，2 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 6 中的图像 2，2

    • Remove the four 11 mm screws on the speaker frame with a Phillips #2 screwdriver.

    编辑

  8. Kingston HyperX Cloud II Microphone Wire Repair: 步骤 7 中的图像 1，3 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 7 中的图像 2，3 Kingston HyperX Cloud II Microphone Wire Repair: 步骤 7 中的图像 3，3

    • Remove the microphone speaker frame.

    • Open the microphone speaker to reveal circuitry.

    • Solder the detached red wire onto the driver.

    • Be cautious not to solder the wrong wire.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Daniel Olaoluwa Ajagbonna

于03/27/23注册

325 声望

创作了2篇指南

徽章: 7

+ 4更多徽章

团队

IUPUI, Team 1-4, Harley Spring 2023 IUPUI, Team 1-4, Harley Spring 2023 的会员

IUPUI-HARLEY-S23S1G4

3 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 8

过去 30 天： 56

总计 860