跳转到主内容

Kindle Touch Rear Casing Replacement

你所需要的

  1. Kindle Touch Rear Casing Replacement, Back Cover: 步骤 1 中的图像 1,3 Kindle Touch Rear Casing Replacement, Back Cover: 步骤 1 中的图像 2,3 Kindle Touch Rear Casing Replacement, Back Cover: 步骤 1 中的图像 3,3
    • Use the plastic opening tool to undo the ten plastic clips around the back panel of the Kindle.

  2. Kindle Touch Rear Casing Replacement: 步骤 2 中的图像 1,2 Kindle Touch Rear Casing Replacement: 步骤 2 中的图像 2,2
    • Gently lift the bottom and slide the panel off.

  3. Kindle Touch Rear Casing Replacement, Battery: 步骤 3 中的图像 1,3 Kindle Touch Rear Casing Replacement, Battery: 步骤 3 中的图像 2,3 Kindle Touch Rear Casing Replacement, Battery: 步骤 3 中的图像 3,3
    • Use a Phillips #00 screwdriver to remove the five screws.

  4. Kindle Touch Rear Casing Replacement: 步骤 4 中的图像 1,3 Kindle Touch Rear Casing Replacement: 步骤 4 中的图像 2,3 Kindle Touch Rear Casing Replacement: 步骤 4 中的图像 3,3
    • Using the flat end of your spudger, gently pry the battery up and remove it.

  5. Kindle Touch Rear Casing Replacement, Bezel: 步骤 5 中的图像 1,2 Kindle Touch Rear Casing Replacement, Bezel: 步骤 5 中的图像 2,2
    • Using a Phillips #00 screwdriver, remove the six 4 mm screws to access the front plate.

  6. Kindle Touch Rear Casing Replacement: 步骤 6 中的图像 1,3 Kindle Touch Rear Casing Replacement: 步骤 6 中的图像 2,3 Kindle Touch Rear Casing Replacement: 步骤 6 中的图像 3,3
    • Use the plastic opening tool to pry the bezel from the top and sides

    • The bottom of the bezel will be glued, so be careful when sliding the clips out.

    • The clips can be easily bent, so do not try to force them out. If you do bend some, they can be bent back.

  7. Kindle Touch Rear Casing Replacement, Rear Casing: 步骤 7 中的图像 1,1
    • Use your Phillips #00 srewdriver to remove the indicated screws.

    • There are three pairs of screws that are each different. The screws on the top corners are 4 mm #00 Phillips screws, the screws on the bottom corners are 2 mm #00 Phillips screws, and the black bottom center screws are 6 mm #00 Phillips screws.

  8. Kindle Touch Rear Casing Replacement: 步骤 8 中的图像 1,2 Kindle Touch Rear Casing Replacement: 步骤 8 中的图像 2,2
    • With the screws removed, gently remove the case from the internals.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Adam Yerly

于01/20/15注册

1,933 声望

创作了7篇指南

团队

USF Tampa, Team 19-5, Blackwell Winter 2015 USF Tampa, Team 19-5, Blackwell Winter 2015 的会员

USFT-BLACKWELL-W15S19G5

3 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 4

总计 1,182