跳转到主内容

简介

Disassembling a tablet often requires some gentle prying of the frame. Be sure to exercise care during these first few steps(disassembling), and do not lose your screws! The Paperwhite is a sturdy tablet that can be broken down into just a few components. This guide will show you in just eight steps how to replace a faulty motherboard.

  1. Kindle Paperwhite 2nd Generation Motherboard Replacement, Battery: 步骤 1 中的图像 1,2 Kindle Paperwhite 2nd Generation Motherboard Replacement, Battery: 步骤 1 中的图像 2,2
    • Insert plastic opening tool into the corners of the Paperwhite and slide around the edge perimeter to remove bezel.

    • Be sure to begin prying along the outer edges , these are the optimal points for removing the bezel.

    • Be careful and do not slide prying tool deeper than 3-4 mm under the side bezel or you could peel off screen protector film.

  2. Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 2 中的图像 1,2 Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 2 中的图像 2,2
    • Using a Screw Driver, Remove the eleven 3.2 mm Phillips 000 screws from corners of the mid-frame and from behind the black strip as shown.

    • Do not forget the screw in the middle of the black adhesive strip.

  3. Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 3 中的图像 1,1
    • Carefully remove the mid-frame from the back cover.

  4. Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 4 中的图像 1,2 Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 4 中的图像 2,2
    • Use a screwdriver to remove the three 3.0 mm Phillips 000 screws that are holding the battery in place as shown.

  5. Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 5 中的图像 1,1
    • Carefully lift the battery and remove it from the device.

  6. Kindle Paperwhite 2nd Generation Motherboard Replacement, Motherboard: 步骤 6 中的图像 1,2 Kindle Paperwhite 2nd Generation Motherboard Replacement, Motherboard: 步骤 6 中的图像 2,2
    • Use a screwdriver to remove the seven 3.0 mm Phillips 000 screws that are holding the motherboard in place as shown.

    • Don't lose the washer that is highlighted with an orange marker as shown. It is a necessary component to protect the screw.

  7. Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 7 中的图像 1,2 Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 7 中的图像 2,2
    • Gently disconnect the zif connectors.

    • Some of these connectors are very thin and fragile, handle with care!

  8. Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 8 中的图像 1,3 Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 8 中的图像 2,3 Kindle Paperwhite 2nd Generation Motherboard Replacement: 步骤 8 中的图像 3,3
    • Gently remove the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Tyler Davis

于2016年09月15日注册

1,431 声望

创作了5篇指南

团队

USF Tampa, Team 11-2, Blackwell Fall 2016 USF Tampa, Team 11-2, Blackwell Fall 2016 的会员

USFT-BLACKWELL-F16S11G2

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 11

过去 30 天: 38

总计 2,679