简介

The case of your Kindle Paperwhite gets a lot of abuse from everyday life. Replace a cracked or a scratched case to restore that fresh out-of-the-box feeling.

  1. Using a spudger or plastic opening tool, gently pry the bezel from the screen. It is easier to start in the corners and work your way around the bezel.
    • Using a spudger or plastic opening tool, gently pry the bezel from the screen. It is easier to start in the corners and work your way around the bezel.

    • Do not insert the spudger too far under the bezel; it could easily damage the screen.

    I found it easier to start this step off with one of the Opening Picks found in the iOpener pack.

    NathanF - 回复

  2. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Remove the eleven 3.0 mm Phillips screws surrounding the midframe.
    • Remove the eleven 3.0 mm Phillips screws surrounding the midframe.

    • At the top of the display, a strip of black tape covers one screw.

    On 3G version you will not have the top middle screw.

    BJones - 回复

    • Lift the midframe out of the case.

    • If the midframe is stuck, slide it to the left first, and then lift it out.

    There are clips in the bottom of the case helping hold the midframe in. Lift the top of the midframe up enough to clear the black back piece and then slide up and out.

    BJones - 回复

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Anthony Nahal

于2013年01月25日注册

42 信誉积分

创作了3篇指南

团队

Cal Poly, Team 3-33, Amido Winter 2013 Cal Poly, Team 3-33, Amido Winter 2013 的会员

CPSU-AMIDO-W13S3G33

4 名成员

创作了10篇指南

Thanks for the guide but do you know anywhere can we get a replacement case?

jerryw - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 10

过去的30天: 48

总计 5,462