跳转到主内容

简介

Is your Kindle Fire HDX 7” tablet refusing to get louder or quitter at the push of its buttons? The ribbon cable or buttons may be broken.

Follow this guide to replace them yourself!

  1. Insert an opening pick underneath the speaker bezel, and slide it along the perimeter to separate it from the tablet. The adhesive is strong and may require an iOpener, or heat gun, to soften. The adhesive is strong and may require an iOpener, or heat gun, to soften.
    • Insert an opening pick underneath the speaker bezel, and slide it along the perimeter to separate it from the tablet.

    • The adhesive is strong and may require an iOpener, or heat gun, to soften.

  2. Remove the speaker bezel.
    • Remove the speaker bezel.

  3. Remove the six pink 3mm T3 Torx screws from the back case.
    • Remove the six pink 3mm T3 Torx screws from the back case.

  4. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  5. Wedge opening picks around the perimeter between the display and back case. Work the opening picks around the perimeter until the two halves disengage from each other.
    • Wedge opening picks around the perimeter between the display and back case.

    • Work the opening picks around the perimeter until the two halves disengage from each other.

    • Don't completely separate as the display ribbon cable still connects the two.

  6. Use the flat end of a spudger to pry up and disconnect the rear panel press-fit connector from the motherboard.
    • Use the flat end of a spudger to pry up and disconnect the rear panel press-fit connector from the motherboard.

  7. Remove the two 2.1mm T5 Torx screws from the volume button retaining bracket.
    • Remove the two 2.1mm T5 Torx screws from the volume button retaining bracket.

  8. Pry up the volume button ribbon cable from the rear panel with the flat end of a spudger. Pull up on the volume button ribbon cable to remove it from the tablet.
    • Pry up the volume button ribbon cable from the rear panel with the flat end of a spudger.

    • Pull up on the volume button ribbon cable to remove it from the tablet.

  9. Remove the volume button from the rear panel.
    • Remove the volume button from the rear panel.

结论

To reassemble your device, follow these instructions in reverse order.

Blake Klein

于2017年01月29日注册

45,084 信誉积分

创作了48篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 16

总计 149