跳转到主内容

Kindle Fire HDX 7" Microphone Replacement

你所需要的

  1. Kindle Fire HDX 7" Microphone Replacement, Speaker Bezel: 步骤 1 中的图像 1,3 Kindle Fire HDX 7" Microphone Replacement, Speaker Bezel: 步骤 1 中的图像 2,3 Kindle Fire HDX 7" Microphone Replacement, Speaker Bezel: 步骤 1 中的图像 3,3
    • Insert an opening pick underneath the speaker bezel, and slide it along the perimeter to separate it from the tablet.

    • The adhesive is strong and may require an iOpener, or heat gun, to soften.

  2. Kindle Fire HDX 7" Microphone Replacement: 步骤 2 中的图像 1,1
    • Remove the speaker bezel.

  3. Kindle Fire HDX 7" Microphone Replacement, Rear Panel: 步骤 3 中的图像 1,1
    • Remove the six pink 3mm T3 Torx screws from the back case.

  4. Kindle Fire HDX 7" Microphone Replacement: 步骤 4 中的图像 1,2 Kindle Fire HDX 7" Microphone Replacement: 步骤 4 中的图像 2,2
    • Wedge opening picks around the perimeter between the display and back case.

    • Work the opening picks around the perimeter until the two halves disengage from each other.

    • Don't completely separate as the display ribbon cable still connects the two.

  5. Kindle Fire HDX 7" Microphone Replacement: 步骤 5 中的图像 1,1
    • Use the flat end of a spudger to pry up and disconnect the rear panel press-fit connector from the motherboard.

    • There may be a glue strip between the battery and the outside case. Gently pry the case open and use the flat end of a spudger to separate the glue strip.

  6. Kindle Fire HDX 7" Microphone Replacement, Microphone: 步骤 7 中的图像 1,2 Kindle Fire HDX 7" Microphone Replacement, Microphone: 步骤 7 中的图像 2,2
    • Pry up the left speaker with the flat end of a spudger and remove.

  7. Kindle Fire HDX 7" Microphone Replacement: 步骤 8 中的图像 1,2 Kindle Fire HDX 7" Microphone Replacement: 步骤 8 中的图像 2,2
    • Pry up the right speaker with the flat end of a spudger and remove.

  8. Kindle Fire HDX 7" Microphone Replacement: 步骤 9 中的图像 1,3 Kindle Fire HDX 7" Microphone Replacement: 步骤 9 中的图像 2,3 Kindle Fire HDX 7" Microphone Replacement: 步骤 9 中的图像 3,3
    • Pry up the microphone connector from the rear panel with the flat end of a spudger.

    • Pull up on the microphone with a pair of tweezers to remove.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Blake Klein

于01/29/17注册

70,356 声望

创作了50篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 603