跳转到主内容
  1. Open up the device by using a plastic opening tool in order to avoid damaging the device. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience. To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.
    • Open up the device by using a plastic opening tool in order to avoid damaging the device.

    • To do so, find the seam along the outer edge of the device and use the plastic tool to pry the back panel up. Doing so may take some force and patience.

  2. There are (4) 3mm T4 Torx screws between both speakers (two each). Remove the ones necessary for whichever speaker needs to be replaced. There are (4) 3mm T4 Torx screws between both speakers (two each). Remove the ones necessary for whichever speaker needs to be replaced. There are (4) 3mm T4 Torx screws between both speakers (two each). Remove the ones necessary for whichever speaker needs to be replaced.
    • There are (4) 3mm T4 Torx screws between both speakers (two each). Remove the ones necessary for whichever speaker needs to be replaced.

  3. Android 维修工具包

    A new screen or battery is one kit away.

    现在开始购物

    Android 维修工具包

    A new screen or battery is one kit away.

    现在开始购物
  4. After the screws are removed, locate the wire, follow it to where it connects to the main device, and pull up gently until it disconnects. After the screws are removed, locate the wire, follow it to where it connects to the main device, and pull up gently until it disconnects. After the screws are removed, locate the wire, follow it to where it connects to the main device, and pull up gently until it disconnects.
    • After the screws are removed, locate the wire, follow it to where it connects to the main device, and pull up gently until it disconnects.

  5. Remove (2) 3mm T4 Torx screws from the bottom speaker. Remove (2) 3mm T4 Torx screws from the bottom speaker.
    • Remove (2) 3mm T4 Torx screws from the bottom speaker.

  6. Same as Step 3, after the screws are removed, follow the wire to where it connects and pull up gently until it disconnects. Same as Step 3, after the screws are removed, follow the wire to where it connects and pull up gently until it disconnects.
    • Same as Step 3, after the screws are removed, follow the wire to where it connects and pull up gently until it disconnects.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

aaa

于2016年10月06日注册

671 信誉积分

创作了5篇指南

团队

USF Tampa, Team 2-3, Sullivan Fall 2016 USF Tampa, Team 2-3, Sullivan Fall 2016 的会员

USFT-SULLIVAN-F16S2G3

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 6

总计 235