修复你的物品 社区 商店

Kindle 3 Keyboard Replacement

已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。

简介

Archived/legacy version of the student-created keyboard guide.

你所需要的

  1. Kindle 3 Keyboard Replacement, Keyboard: 步骤 1 中的图像 1，1

    • Insert a plastic opening tool into the seam between the back and front of the Kindle 3 (as indicated in the photograph).

    • If you have difficulty inserting the plastic opening tool, run the flat edge of the instrument along the seam to find a gap.

    • Using the plastic opening tool, lift the back cover of the device.

    • Remove the back cover.

    编辑

  2. Kindle 3 Keyboard Replacement: 步骤 2 中的图像 1，3 Kindle 3 Keyboard Replacement: 步骤 2 中的图像 2，3 Kindle 3 Keyboard Replacement: 步骤 2 中的图像 3，3

    • Using a Phillips #00 screwdriver, remove the 14 silver screws (4mm) that secure the components within the housing.

    编辑

  3. Kindle 3 Keyboard Replacement: 步骤 3 中的图像 1，1

    • Using the screwdriver, remove the 11 gray screws (4mm) that secure the motherboard to the housing.

    编辑

  5. Kindle 3 Keyboard Replacement: 步骤 4 中的图像 1，1

    • Remove the battery, starting from the side that was secured by the screws.

    编辑

  6. Kindle 3 Keyboard Replacement: 步骤 5 中的图像 1，3 Kindle 3 Keyboard Replacement: 步骤 5 中的图像 2，3 Kindle 3 Keyboard Replacement: 步骤 5 中的图像 3，3

    • Using the plastic opening tool, carefully lift the ribbon cable to disconnect it from the motherboard.

    • Latches secure the three remaining ribbon cables to the motherboard.

    • To disconnect the latched ribbon cable, open the latch and gently slide out the cable.

    • The rightmost photograph shows the ribbon cable with an open latch.

    编辑

  7. Kindle 3 Keyboard Replacement, Remove the 3G card: 步骤 6 中的图像 1，1

    • Insert the plastic opening tool underneath the silver-headed black cable and gently disconnect the cable from the motherboard.

    编辑

  8. Kindle 3 Keyboard Replacement: 步骤 7 中的图像 1，2 Kindle 3 Keyboard Replacement: 步骤 7 中的图像 2，2

    • The motherboard is connected to the device by a red-and-black twisted pair cable. Do not detach the cable.

    • There are 3 spacers. Two of them are where the two screws attaching the battery were. The third is to the bottom right of the silver motherboard unit. Take care not to lose these spacers when moving the motherboard.

    • With the cable still attached, flip over the motherboard.

    • The silver motherboard unit with a serial number may fall out. If this occurs, slide the unit back into place.

    编辑

  9. Kindle 3 Keyboard Replacement: 步骤 8 中的图像 1，1

    • Remove the gray and gold plates from the housing.

    编辑

  10. Kindle 3 Keyboard Replacement: 步骤 9 中的图像 1，1

    • Replace the damaged keyboard.

    • When reassembling the Kindle 3, test the power switch to make sure it moves freely.

    • When reassembling the device, do not mix up the gray and silver screw slots.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

James Gauger

于09/08/14注册

554 声望

创作了2篇指南

徽章: 8

+ 5更多徽章

团队

CSU Fullerton, Team 1-5, Bruce Fall 2014 CSU Fullerton, Team 1-5, Bruce Fall 2014 的会员

CSUF-BRUCE-F14S1G5

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 22