跳转到主内容

简介

This guide explains how to replace the internal chip on the Kid Galaxy Morphibians Explorer Controller.

  1. Turn the controller over to the backside and locate the battery cover screw.
    • Turn the controller over to the backside and locate the battery cover screw.

  2. The battery cover 8.0mm Phillips #2 screw is on the bottom left handle. There is a plastic washer holding the screw to the cover, so completely loosen the screw, but do not remove.
    • The battery cover 8.0mm Phillips #2 screw is on the bottom left handle. There is a plastic washer holding the screw to the cover, so completely loosen the screw, but do not remove.

  3. Once the screw is removed lift the battery cover up from the controller.
    • Once the screw is removed lift the battery cover up from the controller.

  4. Remove the 2 AA batteries.
    • Remove the 2 AA batteries.

  5. Remove both 6.0mm Phillips #1 screws holding the D-pads in place.
    • Remove both 6.0mm Phillips #1 screws holding the D-pads in place.

  6. Insert wisdom here.
    • Insert wisdom here.

  7. Remove the six  8.1 Phillips #1 screws.
    • Remove the six 8.1 Phillips #1 screws.

  8. Lift the antenna holder away from the controller towards the top of the antenna.
    • Lift the antenna holder away from the controller towards the top of the antenna.

  9. Before you separate both halves of the controller make sure the battery holder is facing you so the D-pads stay in place.
    • Before you separate both halves of the controller make sure the battery holder is facing you so the D-pads stay in place.

    • Separate both halves of the controller.

  10. Remove the 7.9 Phillips #1 screw that holds both the antenna and the internal chip.
    • Remove the 7.9 Phillips #1 screw that holds both the antenna and the internal chip.

  11. Remove the internal chip by pulling it away from the controller.
    • Remove the internal chip by pulling it away from the controller.

    • Remove both the positive(red wire) and negative(black wire) from the battery terminals.

    • Reverse the steps to put everything back together.

结论

To reassemble your device, follow these instructions in reverse order.

Rusbell Gonzalez

于2014年09月17日注册

219 信誉积分

创作了5篇指南

团队

USF Tampa, Team 1-2, Hickman Fall 2014 USF Tampa, Team 1-2, Hickman Fall 2014 的会员

USFT-HICKMAN-F14S1G2

3 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 115