Kia Rio Inner Car Door Handle Replacement

简介

This project will require taking off some bolts or screws that may be difficult to loosen. Although not required, an impact driver or impact wrench may be suggested. This is quite easy to follow but the individual steps may be difficult. If your car is older or live in a rainy place then the project may be difficult.

你所需要的

步骤 1 Inner Car Door Handle

Kia Rio Inner Car Door Handle Replacement, Inner Car Door Handle: 步骤 1 中的图像 1，2

Kia Rio Inner Car Door Handle Replacement, Inner Car Door Handle: 步骤 1 中的图像 2，2

Find all the caps hiding the screws and remove them.
These are typically found in the door handle, the side of the door near the top, and in the middle of the door panel.

编辑

步骤 2

Kia Rio Inner Car Door Handle Replacement: 步骤 2 中的图像 3，3

Remove all screws holding the door panel in place.
These are typically found in the middle of the door panel, on the side of the door and on the bottom right side of the door panel.

编辑

步骤 3

Remove the screw on the door handle.
Remove the handle's cover.

编辑

步骤 4

Remove the screw holding the door handle to the door frame.

编辑

步骤 5

Kia Rio Inner Car Door Handle Replacement: 步骤 5 中的图像 3，3

Remove window crank handle using the handle removal tool using the orientations seen in the first and second pictures.
The handle removal tool works by removing the clip seen in the third picture.

编辑

步骤 6

Remove the door panel by pushing upwards.
Although not very difficult to take off, use proper squatting form to ensure you don't hurt yourself.

编辑

步骤 7

Use a sharp knife to cut the strip calk connecting the top half of the moisture shield.
Pull the moisture shield half way down.
Don't tear the moisture shield cover.
The strip calk will still work as an adhesive once taken off so you can stick the moisture shield back onto the door frame.