跳转到主内容

Keypad Duplicate Guide

已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。

你所需要的

  1. Keypad Duplicate Guide, Keypad: 步骤 1 中的图像 1,2 Keypad Duplicate Guide, Keypad: 步骤 1 中的图像 2,2
    • Face the back of the phone towards you. Locate the oval-shaped button at the bottom of the back cover.

    • Press this button and remove the back of the phone.

  2. Keypad Duplicate Guide: 步骤 2 中的图像 1,1
    • Remove the battery.

  3. Keypad Duplicate Guide: 步骤 3 中的图像 1,2 Keypad Duplicate Guide: 步骤 3 中的图像 2,2
    • Identify the four screw locations.

    • Use a torx head screwdriver to unscrew the four screws. In order to unscrew a screw, insert the screwdriver into a screw and rotate the screwdriver counterclockwise.

    • Set the screws aside.

  4. Keypad Duplicate Guide: 步骤 4 中的图像 1,1
    • Unscrew the antenna by rotating it counterclockwise. Remove it from the phone.

  5. Keypad Duplicate Guide: 步骤 5 中的图像 1,1
    • Separate the back of the phone by locating a line separating the front of the phone from the back of the phone. Pull on each of these sides of the phone, front and back, in opposite directions.

    • After the phone is separated, the logic board should be exposed.

  6. Keypad Duplicate Guide: 步骤 6 中的图像 1,1
    • Carefully lift the logic board. This will reveal the keypad found beneath the logic board.

  7. Keypad Duplicate Guide: 步骤 7 中的图像 1,1
    • Remove the keypad from the phone by pulling it towards you and away from the phone.

  8. Keypad Duplicate Guide: 步骤 8 中的图像 1,2 Keypad Duplicate Guide: 步骤 8 中的图像 2,2
    • If the keypad was removed properly, your phone should appear as shown.

    • You may now insert your new keypad by orientating the number side of the keypad face down into the phone. You should not be able to clearly view the numbers from the back of the phone.

结论

To reassemble your device, follow these instructions in reverse order.

iDeleted

于07/07/10注册

2,101 声望

创作了39篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 2,537