Before proceeding, power down your Laptop and remove the power cable.
Put your computer in front of you and open up the display.
When you've opened up the display. Remove this panel with a spudger as shown in this picture. Do it like that on the other side too until the panel clicks open.
When you've done everything correct, you should see a view like this.
After the previous step, try to put the spudger in between the keyboard and the plastic frame. Then the pins holding it in should click.
When pushing the keyboard try to be careful cause underneath, the keyboard is connected to the motherboard with a ribbon cable.
After the previous step there are 4 more plastic pins, for these you can just slide the keyboard out of these.
Be careful when unplugging the ribbon cable from the motherboard.
If you need to replace they keyboard and nothing else now is the time to do so.
With a spudger remove the ribbon cable from the motherboard.
To reassemble your device, follow these instructions in reverse order.
取消：我没有完成这个指南。
与1其他贡献者
于01/20/23注册
794 声望
创作了7篇指南
徽章: 9
+ 6更多徽章
选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。
过去 24 小时： 0
过去 7 天： 0
过去 30 天： 9
总计 231
