跳转到主内容

简介

Use this guide to replace a faulty lid switch on your Kenmore 110 series washing machine.

  1. To avoid risk of electric shock, unplug the washing machine.
    • To avoid risk of electric shock, unplug the washing machine.

    • Using a 5/16" socket wrench or an adjustable wrench, remove the three screws from the top rear of the washer.

    • Lifting from the rear, remove the top panel.

    • Set the top panel on its rear face, with its underside facing you.

    • The top panel will still be connected to the washer by wires and hoses. It will help if you have a flat raised surface to set the top panel on.

  2. iPhone 电池维修工具包

    只要 $29.99

    Buy Now

    iPhone 电池维修工具包

    只要 $29.99

    Buy Now
  3. Using a 5/16" socket wrench or hand wrench, remove the two screws from the component cover. Gripping from the bottom, pull the component cover out of the washer.
    • Using a 5/16" socket wrench or hand wrench, remove the two screws from the component cover.

    • Gripping from the bottom, pull the component cover out of the washer.

  4. Carefully unplug the two wires connected to the lid switch. Remove the two Phillips screws securing the bracket. Remove the green ground wire.
    • Carefully unplug the two wires connected to the lid switch.

    • Remove the two Phillips screws securing the bracket.

    • Remove the green ground wire.

    • With a screwdriver, remove the single screw connecting the lid switch to the bracket.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Robert Trout

于2012年09月26日注册

863 信誉积分

创作了5篇指南

团队

Cal Poly, Team 15-43, Forte Fall 2012 Cal Poly, Team 15-43, Forte Fall 2012 的会员

CPSU-FORTE-F12S15G43

5 名成员

创作了5篇指南

My Kenmore Model 110.24622300 does NOT look anything like this!

rlhaan36 - 回复

my model # 11088732796 is not the same as yours

glafleur1 -

No it ia neither of those. Thank for the reply though. My washer is a 90 series.

Jenn Leffring -

Lol I found the solution on YouTube. All it takes is a zip tie because the lid switch for he 90s series Kenmore washer is two half pieces glued together

Jenn Leffring - 回复

my Kenmore washer model# is 110.24812200; series CP2654205. Cannot remove top to repair lid switch following your video! removed the three screwsf from the back but cannot get control panal to come off! Please reply soon.

bill wardle - 回复

添加评论

浏览统计数据:

过去的24小时: 30

过去的7天: 134

过去的30天: 622

总计 67,497