简介

Use this guide to replace a faulty electronic control on your Kenmore 110 Washing Machine.

Unplug the washing machine!
  • Unplug the washing machine!

  • Using a 5/16" socket wrench or an adjustable wrench, remove the three screws from the top rear of the washer.

  • Lifting from the rear, remove the top panel.

  • The top panel will still be connected by wires and hoses. It will help if you have a flat raised surface to set the top panel on.

添加评论

Using a 5/16" socket wrench or a hand wrench, remove the two screws from the component cover.
  • Using a 5/16" socket wrench or a hand wrench, remove the two screws from the component cover.

  • From the bottom, pull out and remove the component cover.

添加评论

  • Carefully remove the three wire harnesses.

  • With a phillips head screwdriver, remove the three mounting screws.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Robert Trout

于2012年09月26日注册

742 信誉积分

创作了5篇指南

团队

Cal Poly, Team 15-43, Forte Fall 2012 Cal Poly, Team 15-43, Forte Fall 2012 的会员

CPSU-FORTE-F12S15G43

5 名成员

创作了5篇指南

the machine is not completing the wash cycle. stop in the rinse and spin cycle.

is there a fix for this?

R Snagg - 回复

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 45

过去的30天: 223

总计 17,173